ネジ端子セラミックディスクコンデンサ | ドアノブHVコンデンサ | チー

応用

-Smart grid
-High voltage power supplies
-CO2 lasers
-X-ray equipment
-Welding equipment

Range Of Capacity 10 pF to 10,000pF
Dimensional Drawing

部品番号の例

仕様

タイプ	定格電圧 kVdc	Test Voltage kVdc	Corona Inception Voltage (kVrms) (<10pc)	Capaci tance (pF)	Dimensions millimeters (mm)				Terminal Type
					d ± 1	l ±1	h ± 2	d
CCDH701K4UW300220				700	30			12
CCDH102K4UW300220				1000	30			12
CCDH122K4UW400220				1200	40	22	17	14.5
CCDH152K4UW400220				1500	40			14.5
CCDH472K4UW550220				4700	55			14.5
CCDH781K4UW300250				780	30			12
CCDH102K4UW400250				1000	40			12
CCDH112K4UW400250				1100	40			14.5
CCDH172K4UW450250				1700	45			14.5
CCDH182K4UW450250	30	45	12	1800	45	25	20	14.5	ISO M5
CCDH202K4UW500250				2000	50			14.5
CCDH252K4UW550250				2500	55			14.5
CCDH272K4UW550250				2700	55			14.5
CCDH302K4UW550250				3000	55			14.5
CCDH332K4UW550250				3300	55			14.5
CCDH362K4UW600250				3600	60			14.5
CCDH103K4UW900250				10000	90			14.5
CCDH591K4UW330280				590	30			12
CCDH941K4UW400280				940	40	28	23	14.5
CCDH172K4UW500280				1700	50			14.5
CCDH401K4GW300350				400	30	35	30	12
CCDH202K4GW600350				2000	60			14.5
CCDH441K4GW300300				440	30			12
CCDH571K4GW300300				570	30			12
CCDH751K4GW400300				750	40			14.5
CCDH102K4GW500300				1000	50			14.5
CCDH122K4GW450300	40	60	16	1200	45	30	25	14.5	ISO M5
CCDH142K4GW500300				1400	50			14.5
CCDH172K4GW550300				1700	55			14.5
CCDH202K4GW550300				2000	55			14.5
CCDH242K4GW600300				2400	60			14.5
CCDH272K4GW600300				2700	60			14.5
CCDH332K4GW700300				3300	70			14.5

タイプ	定格電圧 kVdc	Test Voltage kVdc	Corona Inception Voltage (kVrms) (<10pc)	Capaci tance (pF)	Dimensions millimeters (mm)				Terminal Type
					d ± 1	l ±1	h ± 2	d
CCDH281K4HW300370				280	30	37	32	12
CCDH341K4HW300330				340	30			12
CCDH561K4HW400330				560	40			14.5
CCDH851K4HW400330	50	75	20	850	40	33	28	14.5	ISO M5
CCDH102K4HW450330				1000	45			14.5
CCDH212K4HW600330				2100	60			14.5
CCDH221K4HW600330				2200	60	33	28	14.5	ISO M5
CCDH332K4HW700330	50	75	20	3000	70			14.5
CCDH602K4HW800800				6000	80	80	75	14.5
CCDH501K4IW400400				500	40			14.5
CCDH701K4IW450400				700	45			14.5
CCDH851K4IW500400	60	90	24	850	50	40	35	14.5	ISOM5
CCDH102K4IW450400				1000	45			14.5
CCDH122K4IW550400				1200	55			14.5
CCDH202K4LW600400	70	100	28	2000	60	40	35	14.5	ISOM5
CCDH751K5AW600460	100	150	40	750	60	46	41	14.5	ISO M5
CCDH102K5AW600460				1000	60			14.5
CCDH102K5BW600530	120	180	48	1000	60	53	48	14.5	ISO M5
CCDH251K5RW300530	150	220	60	250	30	53	48	12	ISO M5
CCDH801K5RW600530				800	60			14.5

 

Marking

	①Manufacturer Marking
	②Temperature Characteristic
	③Rated Capacitance
	④Tolerance of Capacitance
	⑤Rated Voltage

Specification and Test Method

アイテム		仕様	Testing Method
Appear ance	1 Appearance and 寸法	No marked defect	Shall be visually examined or Venire calipers.
	2 Marking	To be easily legible	Shall be visually examined.
	3 材料	Capacitor elements made from N4700 ceramic in a molded epoxy case. Screw terminals: Terminals silver-plated.
	4 Thread	ISO M5	Check with ISO M5 bolts
Electr- ical perfor- mance	5 キャパシタンス	Within the specified tolerance	The capacitance shall be measured at 20°C with 1 ±0.2kHz and AC5V(r.m.s) 最大。.
	6 損失係数 (D.F)	0.2%マックス.	The capacitance shall be measured at 20°C with 1 ±0.2kHz and AC5V(r.m.s) マックス.
	7 Insulation 抵抗 (I.R)	200,000MΩ.min.	The insulation resistance shall be measured with DC 500V within 60±2 s. of charging.
	8 Power frequency withstand voltage	Between terminal	150% of rated voltage（In oil）,1分.
	9 温度特性	-4700±1000ppm/°C	The capacitance should be measured at each step as below table.
			Step	1	2	3	4	5
				20±2°C	-40±2°C	20±2°C	70±2°C	20±2°C
	10 Corona limit	<10pC	で 40% rated AC voltage（In oil）.

アイテム		仕様		Testing Method
Climat ic Tests	11 湿度 (under Steady State)	キャパシタンス	≤10%	Set the capacitor for 100h at 40±2°C in 90 に 95% humidity.
		D.F	<1%
		I.R	>109おお
	12 Temperature cycle test	The Capacitor should be normal, the requirement in item 5 to10 of the table shall be met.		Pass through the atmosphere -40℃，1h→RT，0.5h→ +80℃，1h；10 サイクル.
	13 寿命試験	キャパシタンス change	±5%	Apply a DC voltage of 125% of the rated voltage for 100+24/-0 h in oil at 85±2℃.Post-treatment : capacitor shall be stored for 24±2h at room condition. (charge/discharge current:50mA max.)
		D.F	1.0%マックス.
		I.R	1,000m
Mechan ical Perfor mance Test	14 Strength of Terminal	Torque strength	Capacit or shall not be broken.	When mounting the capacitors on equipment, be sure to mount them within the torque strength values shown in the table below.
				サイズ	torque (N • m)
				M5	1.5
		pull	No unusual	Fix the body of capacitor apply a tensile weight gradually to each terminal in the radial direction of capacitor up to table below.
				サイズ	pull (N)
				M5	5.0

 

Announcements

(1)Handing and storage

Please avoid handing and storage in high temperature,humidity and rain. Collision avoidance.
Do not expose to H2SO4，HCL，HNO3 a nd ot her to xic ga ses.

(2)Operating Collision avoidance.

Please do not get sweat and other electrolytes. Please do not operate with bare hands. Do not weld on the screw terminals.
Do not rework the terminals.

(3)Using

Avoid as much as possible the transfer of radioactive heat from mechanical piping, 等, to the capacitor.

導入

– Excellent temperature characteristics
– Low dissipation
– High insulation resistance
– High breakdown strength
– Fully symmetric full copper electrode
– Epoxy coating
– Screw terminal mounting
応用
– Smart grid
– High voltage power supplies
– CO2 lasers
– X-ray equipment
– Welding equipment