Metallisierter Polyesterfilmkondensator | ESR minimiert | Ca.
CDAA series is constructed with polyester film dielectric, Aluminiumfolienelektrode, Kupferblei, und Epoxidharzbeschichtung. They are suitable for blocking, by-pass and coupling of DC and signal to VHF range, timing circuits,Filterung, and other general purpose usage.
They are also ideal for use in amplifiers, TV, radio, stereo equipment and other electronic equipments.
MERKMALE
◆ High moisture resistance
◆ Unilaterallead-out
◆ Good insulating performance
◆ ESR is minimized
◆ Rated Voltage 100~1200Vdc
BEISPIEL FÜR TEILENUMMERN
ELECTRICAL CHARACTERISTICS
| Artikel | Leistung |
| Betriebsspannungsbereich | 100Vdc, 250Vdc, 400Vdc, 630Vdc, 1200Vdc |
| Nenntemperatur | -55˚C ~ +105˚C (Derates over 85˚C) |
| Klimakategorie | 55 / 105 / 21 |
| Kapazitätsbereich | 0.001 µF ~ 0.27 µF |
| Kapazitätstoleranz | 5% (J), 10% (K), 20%(M) |
| Verlustfaktor | ≤ 1.0% (1KHz, 20° C) |
| Insulation Resistance
Terminal to Terminal |
≥ 30000MΩ, CR ≤ 0.1μF (20° C, 10V, 1min)
≥ 10000MΩ, CR > 0.1μF (20° C, 100V, 1min) |
| Withstand Voltage | 2.0UR : (5S) |
LÖTEN
Die Fläche unter der Kurve gibt die empfohlene Lötzeit an & Temp. für die gezeigten Materialien.
| (µF) | W.V. Gleichstrom | 50V (1H) / 63V (1J) / 100V (2A) | 250V (2E) | 400V (2G) | ||||||||||||
| Code | W | H | T | P | D | W | H | T | P | D | W | H | T | P | D | |
| 0.001 | 102 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 |
| 0.0012 | 122 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 |
| 0.0015 | 152 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 |
| 0.0018 | 182 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 |
| 0.0022 | 222 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 |
| 0.0027 | 272 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 | 6.5 | 12.0 | 4.0 | 3.5 | 0.5 | 7.0 | 13.0 | 4.0 | 4.0 | 0.5 |
| 0.0033 | 332 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 | 6.5 | 12.0 | 4.0 | 3.5 | 0.5 | 7.0 | 13.0 | 4.5 | 4.5 | 0.5 |
| 0.0039 | 392 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 | 6.5 | 12.0 | 4.0 | 4.0 | 0.5 | 7.5 | 13.5 | 4.5 | 4.5 | 0.5 |
| 0.0047 | 472 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 | 6.5 | 12.0 | 4.0 | 4.5 | 0.5 | 8.0 | 13.5 | 4.5 | 4.5 | 0.5 |
| 0.0056 | 562 | 6.0 | 11.5 | 4.0 | 4.0 | 0.5 | 7.0 | 12.0 | 4.0 | 5.0 | 0.5 | 8.0 | 13.5 | 5.0 | 5.5 | 0.5 |
| 0.0068 | 682 | 6.5 | 11.5 | 4.0 | 4.0 | 0.5 | 7.0 | 12.0 | 4.0 | 5.0 | 0.5 | 8.5 | 13.5 | 5.5 | 5.5 | 0.5 |
| 0.0082 | 822 | 7.0 | 11.5 | 4.0 | 4.0 | 0.5 | 8.0 | 13.0 | 4.0 | 5.5 | 0.5 | 9.0 | 15.5 | 5.5 | 5.5 | 0.5 |
| 0.01 | 103 | 7.0 | 11.5 | 4.5 | 4.0 | 0.5 | 8.0 | 13.0 | 5.0 | 5.5 | 0.5 | 9.5 | 15.5 | 6.0 | 5.5 | 0.5 |
| 0.012 | 123 | 7.0 | 11.5 | 4.5 | 4.0 | 0.5 | 8.5 | 13.5 | 5.0 | 5.5 | 0.5 | 10.5 | 15.5 | 6.5 | 6.0 | 0.5 |
| 0.015 | 153 | 7.0 | 11.5 | 4.5 | 4.5 | 0.5 | 8.5 | 13.5 | 5.0 | 5.5 | 0.5 | 10.5 | 15.5 | 6.5 | 6.5 | 0.5 |
| 0.018 | 183 | 7.0 | 12.0 | 4.5 | 4.5 | 0.5 | 9.0 | 14.0 | 6.0 | 6.0 | 0.5 | 11.5 | 17.5 | 7.0 | 7.0 | 0.5 |
| 0.022 | 223 | 8.0 | 12.0 | 4.5 | 5.0 | 0.5 | 9.5 | 14.0 | 6.0 | 6.5 | 0.5 | 11.5 | 17.5 | 7.0 | 7.0 | 0.5 |
| 0.027 | 273 | 8.0 | 13.0 | 5.0 | 5.0 | 0.5 | 10.0 | 15.0 | 6.5 | 6.5 | 0.5 | 12.5 | 18.5 | 7.5 | 7.5 | 0.5 |
| 0.033 | 333 | 8.5 | 13.0 | 5.0 | 5.5 | 0.5 | 10.5 | 15.5 | 6.5 | 6.5 | 0.5 | 12.5 | 18.5 | 7.5 | 7.5 | 0.5 |
| 0.039 | 393 | 9.0 | 13.0 | 5.0 | 5.5 | 0.5 | 11.5 | 15.5 | 7.0 | 7.0 | 0.5 | 14.0 | 19.0 | 8.0 | 8.5 | 0.5 |
| 0.047 | 473 | 9.0 | 13.0 | 5.5 | 5.5 | 0.5 | 11.5 | 16.0 | 7.0 | 7.5 | 0.5 | 14.5 | 19.0 | 8.5 | 9.0 | 0.5 |
| 0.056 | 563 | 9.5 | 13.5 | 5.5 | 6.5 | 0.5 | 12.5 | 16.0 | 8.5 | 8.0 | 0.5 | 14.5 | 21.5 | 8.5 | 9.0 | 0.5 |
| 0.068 | 683 | 10.0 | 13.5 | 6.0 | 7.0 | 0.5 | 12.5 | 17.0 | 8.5 | 8.0 | 0.5 | 14.5 | 22.5 | 9.0 | 9.5 | 0.5 |
| 0.082 | 823 | 10.5 | 13.5 | 6.5 | 7.0 | 0.5 | 14.0 | 19.0 | 10.0 | 8.5 | 0.5 | |||||
| 0.1 | 104 | 11.5 | 13.5 | 7.0 | 7.5 | 0.5 | 15.0 | 19.0 | 10.0 | 9.0 | 0.5 | |||||
| 0.12 | 124 | 12.5 | 15.5 | 7.5 | 8.5 | 0.5 | ||||||||||
| 0.15 | 154 | 13.5 | 16.0 | 8.0 | 9.0 | 0.5 | ||||||||||
| 0.18 | 184 | 14.0 | 16.5 | 8.0 | 9.5 | 0.5 | ||||||||||
| 0.22 | 224 | 14.5 | 17.5 | 8.5 | 9.5 | 0.5 | ||||||||||
| 0.27 | 274 | 15.0 | 21.0 | 9.0 | 10.0 | 0.5 | ||||||||||
| (µF) | W.V. Gleichstrom | 630VDC (2J) | 1200VDC (3B) | ||||||||
| Code | W | H | T | P | D | W | H | T | P | D | |
| 0.001 | 102 | 6.5 | 12.5 | 4.0 | 3.5 | 0.5 | 7.0 | 13.5 | 4.5 | 4.0 | 0.5 |
| 0.0012 | 122 | 6.5 | 12.5 | 4.0 | 3.5 | 0.5 | 7.0 | 13.5 | 4.5 | 4.0 | 0.5 |
| 0.0015 | 152 | 6.5 | 12.5 | 4.0 | 3.5 | 0.5 | 7.5 | 13.5 | 4.5 | 4.5 | 0.5 |
| 0.0018 | 182 | 6.5 | 12.5 | 4.0 | 3.5 | 0.5 | 7.5 | 13.5 | 4.5 | 4.5 | 0.5 |
| 0.0022 | 222 | 7.0 | 12.5 | 4.5 | 4.5 | 0.5 | 8.0 | 14.0 | 5.0 | 5.0 | 0.5 |
| 0.0027 | 272 | 7.5 | 13.5 | 5.0 | 4.5 | 0.5 | 8.0 | 14.0 | 5.5 | 5.0 | 0.5 |
| 0.0033 | 332 | 7.5 | 13.5 | 5.0 | 4.5 | 0.5 | 9.0 | 14.0 | 6.0 | 5.5 | 0.5 |
| 0.0039 | 392 | 8.0 | 13.5 | 5.5 | 5.0 | 0.5 | 9.5 | 15.0 | 6.0 | 6.0 | 0.5 |
| 0.0047 | 472 | 8.5 | 13.5 | 5.5 | 5.0 | 0.5 | 9.5 | 16.0 | 6.0 | 6.0 | 0.5 |
| 0.0056 | 562 | 9.5 | 14.0 | 5.5 | 5.5 | 0.5 | 10.0 | 16.5 | 6.5 | 6.0 | 0.5 |
| 0.0068 | 682 | 10.0 | 14.0 | 6.0 | 6.0 | 0.5 | 10.5 | 16.5 | 6.5 | 6.5 | 0.5 |
| 0.0082 | 822 | 10.0 | 16.0 | 6.0 | 6.0 | 0.5 | 11.5 | 17.5 | 7.5 | 7.5 | 0.5 |
| 0.01 | 103 | 10.0 | 16.0 | 6.5 | 6.0 | 0.5 | 12.0 | 17.5 | 7.5 | 7.5 | 0.5 |
| 0.012 | 123 | 11.0 | 16.5 | 6.5 | 7.0 | 0.5 | |||||
| 0.015 | 153 | 11.5 | 17.0 | 7.0 | 7.5 | 0.5 | |||||
| 0.018 | 183 | 12.0 | 17.5 | 7.5 | 7.5 | 0.5 | |||||
| 0.022 | 223 | 12.5 | 18.0 | 7.5 | 8.0 | 0.5 | |||||
LEISTUNG
| Artikel | Prüfen Methods | Requirements |
|
Resistance to Soldering Heat |
Solder Bath: 260°C± 5°C Immersion Time: 10sec ± 1sec |
Capacitance Change ∆C/C ≤ 5% DF Change ∆ tanδ ≤ 1% at 1KHz IR
≥ 50% spec value |
|
Resistance to Vibration |
Frequency Range: 10 ~ 500Hz Amplitude: 0.75m/m Duration: 6 Std. | There shall be no Visible Damage No Intermittent Contact,
No Open or Short Circuit |
|
Damp heat, Steady State |
Temperatur: 55° C
Relative Luftfeuchtigkeit: 90% Zu 95% Duration: 21 Days |
Capacitance Change ∆C/C ≤ 5%
DF Change ∆ tanδ ≤ 1% at 1KHz IR ≥ 50% spec value |
|
Electrical Endurance |
Temperatur: 105° C
Voltage Applied: 1.25 x Vr (Gleichstrom) Duration: 1,000 Std. |
Capacitance Change ∆C/C ≤ 1% DF Change ∆ tanδ ≤ 1% at 1KHz IR
≥ 50% spec value |
KAPAZITÄTSCODE
| μF | 0.001 | 0.0047 | 0.01 | 0.047 | 0.1 | 0.27 |
| pF | 1000 | 4700 | 10000 | 47000 | 100000 | 270000 |
| Code | 102 | 472 | 103 | 473 | 104 | 274 |
Nennspannung
| W V | 100 | 250 | 400 | 630 | 1200 |
| Code | 2A | 2E | 2G | 2J | 3B |
RADIALER LEITUNGSABSTAND
*Leadspace ist ein unverformter ursprünglicher Leadspace mit geradem Lead.
| Lead S | pacing | 5.0mm | 7.5mm | 10mm |
| Code | 050 | 075 | 100 | |
TAPE CODE (Lead spacing of tape)
*see diagram on page 4
| Bleiabstand | 5.0mm | 7.5mm | 10mm |
| Tape Packing | A | A | A |
| Code | RT1 | RT2 | RT3 |
LEITUNGSLÄNGE VON DER SITZEBENE
(Bulk Pack)
| mm | 5 | 10 | 15 | 20 |
| Code | 50 | 100 | 150 | 250 |
TOLERANCE
| Code | Toleranz |
| J | ±5 % |
| K | ±10 % |
| M | ±20 % |
LEAD STYLE EXAMPLES
RADIAL TAPING CODE DIAGRAM
SPEZIFIKATIONEN
| Beschreibung |
Letter |
Dimension (mm) | |||
| RT1 | RT2 | RT3 | Tol. | ||
| Lead Wire Diameter | D | 0.5 / 0.6 | 0.5 / 0.6 | 0.6 | + 0.05 |
| Tape Pitch | P | 12.7 | 12.7 | 12.7 | + 1 |
| Feed Hole Pitch | PO | 12.7 | 12.7 | 12.7 | + 0.2 |
| Centering of the Lead Wire | P1 | 3.85 | 2.6 / 3.75 | 7.7 | + 0.7 |
| Centering of the Body | P2 | 6.35 | 6.35 | 12.7 | + 1.3 |
| Bleiabstand (Pitch) | F | 5 | 7.5 | 10 | + 0.6; -0.1 |
| Component Alignment | ∆h | 0 | 0 | 0 | + 2 |
| Height of Componenet from Tape Center | H | 18.5 | 18.5 | 18.5 | + 0.5 |
| Carrier Tape Width | W | 18 | 18 | 18 | + 1; -0.5 |
| Hold Down Tape Width | WO | 6 | 6 | 9 | Min |
| Hole Position | W1 | 9 | 9 | 9 | + 0.5 |
| Hold Down Tape Position | W2 | 3 | 3 | 3 | Max |
| Feed Hole Diameter | Do | 4 | 4 | 4 | + 0.2 |
| Tape Thickness | T | 0.7 | 0.5 | 0.5 | + 0.2 |
| Figure | fig | 1 oder 2 | 1.2 oder 3 | 4 | |
Remark: *Allowance of accumulated pitch less than 1mm at the sum of 20 pitches.
*Continuous empty component less than 3 consecutive pieces.
*Total empty on one reel less than 1%.
EINFÜHRUNG
CDAA series is constructed with polyester film dielectric, Aluminiumfolienelektrode, Kupferblei, und Epoxidharzbeschichtung. Sie eignen sich zum Blockieren, by-pass and coupling of DC and signal to VHF range, timing circuits, Filterung, and other general purpose usage.
They are also ideal for use in amplifiers, TV, radio, stereo equipment and other electronic equipments.
