Aluminiumelektrolytkondensator CAAAA für Militär & Verteidigung
Military products meet the environmental requirements of vibration
and low pressure, and military products can be supplied according to the “seven specialty” level or the “allgemeine Armee” Ebene.
Es eignet sich zum Filtern, coupling and bypass in electronic circuits in aerospace, Luftfahrt, alpin, high altitude and
※Main technical parameters:
| Projekt | Merkmal | ||||||||
| Operating temperature range | -55℃-+105℃ | ||||||||
| Rated voltage range | 16V-450V | ||||||||
| Nominal capacitance range | 82μF-22000μF | ||||||||
| Allowable deviation of nominal capacitance
(25℃，120Hz） |
M（±20%） | ||||||||
| DC leakage current（25℃，5min） | I≤0.01CRUR（μA）；CR：Nominal capacitance（μF）；UR：Rated voltage（V） | ||||||||
| Loss tangent tgδ (max)(25℃，120Hz） | For details, please refer to the “List of Product Specifications and Technical
Parameter” |
||||||||
|
Temperatureigenschaften (120 Hz.) |
Impedance ratio |
UR（V） | 16 | 25-100 | 160-250 | 350-450 | |||
| Z-55℃/ Z+25℃ | ≤5 | ≤3 | ≤7 | ≤12 | |||||
| Rate of change in
Kapazität |
（C+25℃-C-55℃）/C+25℃≤20% | ||||||||
|
Haltbarkeit |
The rated voltage with ripple current is applied at 105°C for 5000h, and after recovery for 24h, the electrical performance is tested at room temperature
(25°C±5°C), and its electrical performance conforms to: |
||||||||
| Rate of change in capacitance | ≤± 20% of the initial value | ||||||||
| The loss angle tangent tgδ | ≤ 200% of the initial specified value | ||||||||
| DC leakage current | ≤ initial prescriptive value | ||||||||
|
Bei hohen Temperaturen lagern |
After storage at 105°C for 1000h, recovery for 24h, and test at room temperature
(25°C±5°C), its electrical performance conforms to: |
||||||||
| Rate of change in capacitance | ≤± 20% of the initial value | ||||||||
| The loss angle tangent tgδ | ≤ 200% of the initial specified value | ||||||||
| DC leakage current | ≤ 200% of the initial specified value | ||||||||
Executive standard number: Q/MN118-2016 Seven special standard number: QZJ840634
※Outline drawing and size table (mm)
※ parameters of sheet
| Rated Voltage/V | Kappe
(μF) |
W×H×L
（mm） |
tgδ
（120Hz） |
Ripple curren Arms，120Hz | Rated Voltage/V | Kappe
(μF) |
W×H×L
（mm） |
tgδ
（120Hz） |
Ripple current Arms，120Hz | |
|
16 |
15000 | 35×16×35 | 0.47 | 4.2 | 100 | 1000 | 35×16×35 | 0.12 | 1.9 | |
| 22000 | 35×16×50 | 0.61 | 4.5 | 1500 | 35×16×50 | 0.12 | 2.7 | |||
|
25 |
8200 | 35×16×35 | 0.31 | 3.0 | 160 | 560 | 35×16×35 | 0.20 | 1.4 | |
| 15000 | 35×16×50 | 0.45 | 4.8 | 680 | 35×16×50 | 0.20 | 1.8 | |||
|
35 |
5000 | 35×16×35 | 0.22 | 2.3 |
200 |
330 | 35×16×35 | 0.20 | 1.1 | |
| 6800 | 35×16×50 | 0.25 | 2.6 | 470 | 35×16×50 | 0.20 | 1.2 | |||
| 8200 | 35×16×50 | 0.28 | 3.1 | 560 | 35×16×50 | 0.20 | 1.4 | |||
|
50 |
3300 | 35×16×35 | 0.15 | 2.5 |
250 |
270 | 35×16×35 | 0.20 | 0.8 | |
| 4700 | 35×16×35 | 0.18 | 2.5 | 330 | 35×16×50 | 0.20 | 1.4 | |||
| 5000 | 35×16×50 | 0.19 | 3.3 | 470 | 35×16×50 | 0.20 | 1.6 | |||
| 6800 | 35×16×50 | 0.22 | 3.5 | 350 | 150 | 35×16×35 | 0.20 | 0.7 | ||
|
63 |
2700 | 35×16×35 | 0.14 | 2.2 | 220 | 35×16×50 | 0.20 | 1.3 | ||
| 3300 | 35×16×50 | 0.15 | 2.7 | 400 | 100 | 35×16×35 | 0.20 | 0.5 | ||
|
80 |
1500 | 35×16×35 | 0.12 | 2.0 | 150 | 35×16×50 | 0.20 | 1.1 | ||
| 2200 | 35×16×50 | 0.13 | 2.7 | 450 | 82 | 35×16×35 | 0.20 | 0.3 | ||
| 100 | 35×16×50 | 0.20 | 0.7 | |||||||
MERKMALE
◆ 105°C, 1000 Stunden garantiert.
◆ Standard-Mikrominiaturgröße mit 5 mm Höhe.
◆ RoHS-Konformität
