Micor mini elektrolytic makissions ▏85 ℃ 1.000hrs ▏cazc
FONTassementer
85° C, 1000 Stonnen assuréiert, 5mm Héicht mat niddereg Auswee.
Benotzt an ganz kompakt héich Temperatur industriell Equipement.
85° C, 1000 Stonnen assuréiert, 5mm Héicht mat niddereg Auswee.
Benotzt an ganz kompakt héich Temperatur industriell Equipement.
Spezifikatioune
| Artikel iwwert d'Säit | Performech | |||||||||||
| Operatioun Temperatur Beräich | -40° ~ + 85° C | |||||||||||
| Trimitatanz Toleranz | ± 20% (120Hz, 20° C) | |||||||||||
| Leckaktuell (bei 20°C) | ech = 0,002CV oder 0.4 ( A K)) wat och ëmmer méi grouss ass (no 2
Minutten) Wou, C = Bewäert Kapazitéit an F. V = Bewäert DC Aarbechtsspannung an V. |
|||||||||||
| Dissipaton Faktor Tan um 120 Hz,20° C | Bewäert Spannung | 4 | 6.3 | 10 | 16 | 25 | 35 | 50 | ||||
| Tan (max) | 0.35 | 0.27 | 0.23 | 0.19 | 0.15 | 0.13 | 0.11 | |||||
| Taux | d Spannung | 4 | 6.3 | 10 | 16 | 25 | 35 | 50 | ||||
| Niddreg Temperatur
Charakteristiken (an 120 Hz) |
Impedanz Verhältnis | Z(-25° C) /Z(+20° C) | 6 | 3 | 2 | 2 | 2 | 2 | 2 | Impedance ratio shall not exceed
the values given in the table. |
||
| Z(-40° C) /Z(+20° C) | 12 | 9 | 7 | 5 | 3 | 3 | 3 | |||||
|
Lued Liewen Test |
Test Zäit | 1000 Hrs |
The specification shall be satisfied when the capacitors are restored to 20°C after rated voltage applied for 1000hrs at 85°C. |
|||||||||
| Kapazitéit änneren | 4 ~ 6.3V | ± 30% | ||||||||||
| 10 ~ 50V | ± 25% | |||||||||||
| Dissipization Faktor | Manner wéi 200% vum spezifesche Wäert | |||||||||||
| Leckaktuell | Bannent spezifizéierte Wäerter | |||||||||||
|
Regal Liewen Test |
Test Zäit | 500 Hrs |
The specification shall be satisfied when the capacitors are restored to 20°C after exposing them for 500 Stonnen bei 85°C ouni Spannung ugewannt. |
|||||||||
| Kapazitéit änneren | 4 ~ 6.3V | ± 30% | ||||||||||
| 10 ~ 50V | ± 25% | |||||||||||
| Dissipization Faktor | Manner wéi 200% vum spezifesche Wäert | |||||||||||
| Leckaktuell | Bannent spezifizéierte Wäerter | |||||||||||
| Standarden | Erfëllt Charakteristesch W vum JIS C 5141 | |||||||||||
LEAD SPACING AN DIAMETER
| D | 4 | 5 | 6.3 |
| P | 1.5 | 2.0 | 2.5 |
| d | 0.45 | ||
| 1.0 | |||
| 0.5 |
DIMENSIOUNEN & ACCUEILER RIPPLE AKTUELL
| Vdc
F an CODE CODEN |
4VR (0G) | 6.3VR (0Jin) | 10VR (1A K)) | 16VR (1C) | 25VR (1E) | 35VR (1VR) | 50VR (1H H H) | ||||||||
| D x L | mA | D x L | mA | D x L | mA | D x L | mA | D x L | mA | D x L | mA | D x L | mA | ||
| 0.10 | 0R1 | 4 x 5 | 1 | ||||||||||||
| 0.22 | R22 | 4 x 5 | 2 | ||||||||||||
| 0.33 | R33 | 4 x 5 | 3 | ||||||||||||
| 0.47 | R47 | 4 x 5 | 3.8 | ||||||||||||
| 1 | 010 | 4 x 5 | 6.9 | ||||||||||||
| 2.2 | 2R2 | 4 x 5 | 10 | ||||||||||||
| 3.3 | 3R3 | 4 x 5 | 13 | ||||||||||||
| 4.7 | 4R7 | 4 x 5 | 14 | 4 x 5 | 16 | 5 x 5 | 19 | ||||||||
| 10 | 100 | 4 x 5 | 19 | 5 x 5 | 23 | 5 x 5 | 24 | 6.3 x 5 | 32 | ||||||
| 22 | 220 | 4 x5 | 22 | 5 x5 | 24 | 5 x 5 | 28 | 6.3 x 5 | 38 | 6.3 x 5 | 42 | ||||
| 33 | 330 | 5 x 5 | 27 | 5 x5 | 28 | 5 x5 | 30 | 6.3 x 5 | 41 | 6.3 x 5 | 46 | ||||
| 47 | 470 | 5 x 5 | 32 | 5 x5 | 34 | 6.3 x5 | 43 | 6.3 x 5 | 50 | ||||||
| 100 | 101 | 6.3 x 5 | 54 | 6.3 x5 | 60 | ||||||||||
Deel Zuel Beispill CAZC 0R1 M 1H H H op 040 050
FONTassementer
◆ 85°C, 1000 Stonnen assuréiert, 5mm Héicht mat niddereg Auswee.
◆ Benotzt an ganz kompakt héich Temperatur industriell Equipement.
◆ RoHS Konformitéit
