Metallized Polyester Film Capacitor Mini Size | CD
CDAF Series are constructed with metalized polyester film dielectric, Kupferbläi an Epoxyharzpulverbeschichtung. Si si gëeegent fir ze blockéieren, Kopplung, découpling, feicher, Contournement Timing Circuit an ideal fir benotzen an Telekommunikatioun Equipement, Daten Veraarbechtung Equipement, industriell Instrument, automatesch Kontrollsystemer an aner allgemeng elektronesch Ausrüstung.
FONTassementer
◆ Operatioun Temp. Range :-40°C ~ +125°C (Derates iwwer 105 ° C)
◆ Kapazitéit Range:0.001~1.2uF
◆ Kapazitéit Toleranz: J=5% K=10% M=20%
◆ Nominell Volt V R 85 ° C: 50VR, 63VR,100Vdc, 250Vdc, 400Vdc, 450Vdc, 630Vdc,1000Vdc
Deel Zuel Beispill
Toleranz
| CODE CODEN | Toleranz |
| Jin | ± 5% |
| K St | ± 10% |
| M | ± 20% |
Lead Stil Beispiller
Trimitik Code
| F an | 0.01 | 0.047 | 0.1 | 0.47 | 1.0 |
| pf | 10000 | 47000 | 100000 | 470000 | – |
| CODE CODEN | 103 | 473 | 104 | 474 | 105 |
Bewäerten Voltage
| WV | 50 | 63 | 100 | 250 | 400 | 630 |
| CODE CODEN | 1H H H | 1Jin | 2A K) | 2E | 2G | 2Jin |
VERPAKKING
| Meth | od | Bulk | Munitioun | Reel |
| CODE CODEN | Elz | A K) | R | |
Lead Längt vum Sëtzfliger
(Bulk Pack)
| mm | 5 | 10 | 15 | 20 | 25 |
| CODE CODEN | 050 | 100 | 150 | 200 | 250 |
Tape Copiococode (Lead Spacing vun Band)
| Spac | g | 5mm |
| Verpakung | A oder R | |
| CODE CODEN | Rt1 (See Diagram) | |
LEAD STYLE
| CODE CODEN | Stil |
| S | Riichtaus |
| K St | Kink-In (Stand Off) |
| F an | Form eraus |
| ech | Form an |
** Fir Bulk Verpakung mat geformte Leads, addéieren eng zousätzlech 3 Zifferen Lead Abstand Code um Enn vun Deel Zuel.
MAXIMUM Dimensiounen (mm)
| W-W. VR. | 50 / 63Vdc (1H/1J) | 100Vdc(2A K)) | 250Vdc(2E) | 400Vdc(2G) | 630Vdc (2Jin) | ||||||||||||||||||||
| ( μF) | code | W-W | H H H | T | P | d | W-W | H H H | T | P | d | W-W | H H H | T | P | d | W-W | H H H | T | P | d | W-W | H H H | P | d |
| 0.001 | 102 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 5 | 0.5 |
| 0.0022 | 122 | 6.5 | 6.5 3.5 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 5 | 0.5 | ||
| 0.0033 | 332 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 5 | 0.5 |
| 0.0047 | 472 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 5 | 0.5 |
| 0.0056 | 562 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | ||||
| 0.0068 | 682 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | ||||
| 0.0082 | 822 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | ||||
| 0.010 | 103 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | ||||
| 0.012 | 123 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | |||||||||
| 0.015 | 153 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | |||||||||
| 0.018 | 183 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | |||||||||
| 0.022 | 223 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | |||||||||
| 0.027 | 273 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 3.5 | 5 | 0.5 | |||||||||
| 0.033 | 333 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.039 | 393 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.047 | 473 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.056 | 563 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.068 | 683 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.082 | 823 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.1 | 104 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.12 | 124 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 10 | 5.0 | 5 | 0.5 | |||||||||
| 0.15 | 154 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 10 | 5.0 | 5 | 0.5 | |||||||||
| 0.18 | 184 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 10 | 6.0 | 5 | 0.5 | |||||||||
| 0.22 | 224 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 10 | 6.0 | 5 | 0.5 | |||||||||
| 0.27 | 274 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 10.5 | 7.0 | 5 | 0.5 | |||||||||
| 0.33 | 334 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 11 | 7.0 | 5 | 0.5 | |||||||||
| 0.39 | 394 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 12 | 8.0 | 5 | 0.5 | |||||||||
| 0.47 | 474 | 7.0 | 7.5 | 4.5 | 5 | 0.6 | 7.0 | 7.5 | 4.5 | 5 | 0.6 | 7.5 | 12 | 8.5 | 5 | 0.5 | |||||||||
| 0.56 | 564 | 7.0 | 8.5 | 5.0 | 5 | 0.6 | 7.0 | 8.5 | 5.0 | 5 | 0.6 | ||||||||||||||
| 0.68 | 684 | 7.0 | 8.5 | 5.0 | 5 | 0.6 | 7.0 | 8.5 | 5.0 | 5 | 0.6 | ||||||||||||||
| 1.0 | 824 | 7.0 | 8.5 | 5.0 | 5 | 0.6 | 7.0 | 10 | 6.0 | 5 | 0.6 | ||||||||||||||
| 1.5 | 155 | 7.0 | 10.0 | 6.5 | 5 | 0.5 | 7.0 | 10 | 6.0 | 5 | 0.6 | 17 | 15 | 7.0 | 15 | 0.8 | |||||||||
| 2.2 | 225 | 7.0 | 10.0 | 6.5 | 5 | 0.6 | 7.0 | 10.5 | 7.0 | 5 | 0.6 | 17 | 15.5 | 6.5 | 15 | 0.8 | |||||||||
Performech
| Artikel iwwert d'Säit | Metalliséiert Polyester |
| Kapazitéit Drift | Zyklus duerch d'Betribstemperaturberäich 2%. |
| Fiichtegkeet Test | Will withstand the test of R.H. 95% at 40°C for 1000hrs. C < 5% DF < 1.2% AN > 10000MΩ |
| Laascht Test | Will withstand a testing voltage at 140% vum W.V. for 1000hrs at 85°C. C < 5% DF < 1.2% AN > 5000MΩ |
| Lead Pull Test | Will withstand a pull of 1.5Kg applied axialy for 10 Sekonnen. |
|
Lead Bend Test |
Will sustain two cycles without breaking when attaching a load of 0.5Kg to the end of the lead and then rotating the capacitor 90º from the direction of lead egress. Then 180 in opposite direction, then back to the starting point. |
| Solderability | Immersed in molten solder (230 + 0.5 sec.) after testing, the wound lead and gap in the wound lead will be covered and filled by solder. Will be difficult to unwind byfinger. |
| Dielectric Strength | Shall withstand 200% oder 160% of rated voltage at 25°C for 1 minute with current limiting resistance of 1 Oh
/ VR. |
Schlofden
D'Gebitt ënner der Kurve ass déi recommandéiert SOLDING TIDERS & temp. Fir d'Materialien gewisen
RADIAL TAPING
Spezifikatioune
| Broessdatsch |
Busribd |
Dimensioun (mm) |
| Rt1 | ||
| Lead Wire Duerchmiesser | d | 0.5 / 0.6 |
| Tapping Pitch | P | 12.7 |
| Fidderen Hole Pitch | Po | 12.7 |
| Zentrum vun der Lead Drot | P1 | 3.85 |
| Zentrum vum Kierper | P2 | 6.35 |
| Lead Spazéieren (Pech un d'Pitting) | F an | 5 |
| Komponent Ausrichtung | ΔH | 0 |
| Héicht vu Complenet vum Tape Center | H H H | 18.5 |
| Carrier Tape Breet | W-W | 18 |
| Halt Tape Breet erof | Wa gewo | 6 |
| Lach Positioun | Weá | 9 |
| Haalt Tape Positioun erof | W2 | 3 |
| Fidderen Lach Duerchmiesser | Maach dat | 4 |
| Tape Dicke | T | 0.7 |
| Zuelfen | Figong | 1 oder 2 |
Bemuch: *Erlaabnes vum Akkumuléierte Pitch manner wéi 1mm op der Zomm vun 20 riichtchen.
*Kontinuéierlech eidel Komponent manner wéi 3 hannert Stécker.
*Total eidel op enger Reel manner wéi 1%.
Aféierung
CDAF Series are constructed with metalized polyester film dielectric, Kupferbläi an Epoxyharzpulverbeschichtung. Si si gëeegent fir ze blockéieren, Kopplung, découpling, feicher, Contournement Timing Circuit an ideal fir benotzen an Telekommunikatioun Equipement, Daten Veraarbechtung Equipement, industriell Instrument, automatesch Kontrollsystemer an aner allgemeng elektronesch Ausrüstung.
