Metallized Polyester Film Capacitor Mini Size | CD
CDAF Series are constructed with metalized polyester film dielectric, medený olovo a práškový náter z epoxidovej živice. Sú vhodné na blokovanie, spojka, oddelenie, filtrovanie, bypass časovací obvod a ideálny pre použitie v telekomunikačných zariadeniach, zariadenia na spracovanie údajov, priemyselný nástroj, automatické riadiace systémy a iné všeobecné elektronické zariadenia.
Funkcie
◆ Operating Temp. Rozsah :-40°C ~ +125°C (Derates over 105°C)
◆ Rozsah kapacity:0.001~1.2uF
◆ Tolerancia kapacity: J=5% K=10% M=20%
◆ Rated Voltage V R 85°C: 50Vložka, 63Vložka,100Vdc, 250Vdc, 400Vdc, 450Vdc, 630Vdc,1000Vdc
PRÍKLAD ČÍSLA ČASTI
TOLERANCIA
| kód | Tolerancia |
| J | ± 5 % |
| K | ±10 % |
| M | ± 20% |
PRÍKLADY ŠTÝLU VEDENIA
KAPACITNÝ KÓD
| F | 0.01 | 0.047 | 0.1 | 0.47 | 1.0 |
| pf | 10000 | 47000 | 100000 | 470000 | – |
| kód | 103 | 473 | 104 | 474 | 105 |
MENOVÉ NAPÄTIE
| WV | 50 | 63 | 100 | 250 | 400 | 630 |
| kód | 1H | 1J | 2A | 2E | 2G | 2J |
BALENIE
| Meth | od | Hromadné | Munícia | Navijak |
| kód | B | A | R | |
DĹŽKA VEDENIA OD ROVINY SEDENIA
(Hromadné balenie)
| mm | 5 | 10 | 15 | 20 | 25 |
| kód | 050 | 100 | 150 | 200 | 250 |
KÓD PÁSKY (Vzdialenosť olova medzi páskou)
| Spacin | g | 5mm |
| Balenie | A alebo R | |
| kód | RT1 (See Diagram) | |
ŠTÝL OLOVA
| kód | štýl |
| S | Rovno |
| K | Kink-In (Odstúpte) |
| F | Form Out |
| I | Form In |
** Pre hromadné balenie s tvarovanými vodičmi, pridať ďalšie 3 číselný kód medzery na konci čísla dielu.
MAXIMÁLNE ROZMERY (mm)
| W. Vložka. | 50 / 63VDC (1H/1J) | 100VDC(2A) | 250VDC(2E) | 400VDC(2G) | 630VDC (2J) | ||||||||||||||||||||
| ( μf) | code | W | H | T | P | d | W | H | T | P | d | W | H | T | P | d | W | H | T | P | d | W | H | P | d |
| 0.001 | 102 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 5 | 0.5 |
| 0.0022 | 122 | 6.5 | 6.5 3.5 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 5 | 0.5 | ||
| 0.0033 | 332 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 5 | 0.5 |
| 0.0047 | 472 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 5 | 0.5 |
| 0.0056 | 562 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | ||||
| 0.0068 | 682 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | ||||
| 0.0082 | 822 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | ||||
| 0.010 | 103 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | ||||
| 0.012 | 123 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | |||||||||
| 0.015 | 153 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | |||||||||
| 0.018 | 183 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | |||||||||
| 0.022 | 223 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | |||||||||
| 0.027 | 273 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 3.5 | 5 | 0.5 | |||||||||
| 0.033 | 333 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.039 | 393 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.047 | 473 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.056 | 563 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.068 | 683 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.082 | 823 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.1 | 104 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.12 | 124 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 10 | 5.0 | 5 | 0.5 | |||||||||
| 0.15 | 154 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 10 | 5.0 | 5 | 0.5 | |||||||||
| 0.18 | 184 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 10 | 6.0 | 5 | 0.5 | |||||||||
| 0.22 | 224 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 10 | 6.0 | 5 | 0.5 | |||||||||
| 0.27 | 274 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 10.5 | 7.0 | 5 | 0.5 | |||||||||
| 0.33 | 334 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 11 | 7.0 | 5 | 0.5 | |||||||||
| 0.39 | 394 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 12 | 8.0 | 5 | 0.5 | |||||||||
| 0.47 | 474 | 7.0 | 7.5 | 4.5 | 5 | 0.6 | 7.0 | 7.5 | 4.5 | 5 | 0.6 | 7.5 | 12 | 8.5 | 5 | 0.5 | |||||||||
| 0.56 | 564 | 7.0 | 8.5 | 5.0 | 5 | 0.6 | 7.0 | 8.5 | 5.0 | 5 | 0.6 | ||||||||||||||
| 0.68 | 684 | 7.0 | 8.5 | 5.0 | 5 | 0.6 | 7.0 | 8.5 | 5.0 | 5 | 0.6 | ||||||||||||||
| 1.0 | 824 | 7.0 | 8.5 | 5.0 | 5 | 0.6 | 7.0 | 10 | 6.0 | 5 | 0.6 | ||||||||||||||
| 1.5 | 155 | 7.0 | 10.0 | 6.5 | 5 | 0.5 | 7.0 | 10 | 6.0 | 5 | 0.6 | 17 | 15 | 7.0 | 15 | 0.8 | |||||||||
| 2.2 | 225 | 7.0 | 10.0 | 6.5 | 5 | 0.6 | 7.0 | 10.5 | 7.0 | 5 | 0.6 | 17 | 15.5 | 6.5 | 15 | 0.8 | |||||||||
VÝKON
| Položka | Metalized Polyester |
| Capacitance Drift | Cycled through the operating temperature range 2%. |
| Humidity Test | Will withstand the test of R.H. 95% at 40°C for 1000hrs. C < 5% DF < 1.2% A > 10000MΩ |
| Load Test | Will withstand a testing voltage at 140% of W.V. for 1000hrs at 85°C. C < 5% DF < 1.2% A > 5000MΩ |
| Lead Pull Test | Will withstand a pull of 1.5Kg applied axialy for 10 sekúnd. |
|
Lead Bend Test |
Will sustain two cycles without breaking when attaching a load of 0.5Kg to the end of the lead and then rotating the capacitor 90º from the direction of lead egress. Then 180 in opposite direction, then back to the starting point. |
| Spájkovateľnosť | Immersed in molten solder (230 + 0.5 sec.) after testing, the wound lead and gap in the wound lead will be covered and filled by solder. Will be difficult to unwind byfinger. |
| Dielectric Strength | Shall withstand 200% alebo 160% of rated voltage at 25°C for 1 minute with current limiting resistance of 1 Oh
/ Vložka. |
SPÁJKOVANIE
Oblasť pod krivkou je odporúčaný čas spájkovania & tepl. pre zobrazené materiály
RADIAL TAPING
ŠPECIFIKÁCIE
| Popis |
List |
Rozmer (mm) |
| RT1 | ||
| Priemer oloveného drôtu | d | 0.5 / 0.6 |
| Tapping Pitch | P | 12.7 |
| Rozstup podávacích otvorov | PO | 12.7 |
| Centrovanie oloveného drôtu | P1 | 3.85 |
| Centrovanie tela | P2 | 6.35 |
| Lead Spacing (Smola) | F | 5 |
| Zarovnanie komponentov | ∆h | 0 |
| Výška komponentu od stredu pásky | H | 18.5 |
| Šírka nosnej pásky | W | 18 |
| Podržte stlačenú šírku pásky | WO | 6 |
| Poloha otvoru | W1 | 9 |
| Podržte pozíciu pásky | W2 | 3 |
| Priemer plniaceho otvoru | Do | 4 |
| Hrúbka pásky | t | 0.7 |
| Obrázok | obr | 1 alebo 2 |
Poznámka: *Povolenie akumulovaného stúpania menej ako 1 mm v súčte 20 ihriská.
*Priebežná prázdna zložka menej ako 3 po sebe idúce kusy.
*Celkom prázdne na jednom valci menej ako 1%.
Zavedenie
CDAF Series are constructed with metalized polyester film dielectric, medený olovo a práškový náter z epoxidovej živice. Sú vhodné na blokovanie, spojka, oddelenie, filtrovanie, bypass časovací obvod a ideálny pre použitie v telekomunikačných zariadeniach, zariadenia na spracovanie údajov, priemyselný nástroj, automatické riadiace systémy a iné všeobecné elektronické zariadenia.
