Kondenzátor s nízkym napätím |0.23~ 0,45KVAC | CJCC
Všeobecný popis:
Samoliečebný nízkonapäťový kondenzátor značky JINPEI vyrobený z pokročilého metalizovaného filmu, is produced strictly in accordance with the Nation Standard and IEC standard by he introduced advanced foreign techniques and equipment. The device is suitable for
low voltage power network to improve power factor, reduce reactive loss and better the voltage quality.
Charakteristika
1.Malý objem, light weight and convenient installation
2.No oil leakage, no-toxic and environment protection
3.Low loss, little radiation and low temperature rise
4.Excellent self-healing performance
5.Bezpečnosť
Working condition
1.Nadmorská výška: lower than 2000m
2.Teplota okolia: -25~50℃degree
3.Vlhkosť: smaller than 85%
4.After the power cut off, reputing when make sure the remain voltage is smaller than 10% of the rated voltage, usually this time is 200s, so the controller you use should has the function of time delay for reputing after cut off.o shunt off.
Technical data
1.Menovité napätie: 230Vak, 400Vak, 450VAC 3.Rated output: 1-60 KVAR
2.Menovitá frekvencia: 50Hz or 60Hz
3.Tolerancia kapacity: -5% – +10%
4.Tangent of the loss angle: With the power frequency rated voltage,
5.Vydržať napätie: Between terminal 2.15 times rated voltage for 5 sekúnd, between terminals and container 2 Un+2Kv or 3KVAC choose the higher one for 10 sekúnd.
6.Max permissible over-voltage: 110% menovité napätie
7.Max permissible over-current: 130% rated current
8.Self-discharge feature: Less than 50V in 3min after power broke down when the DC is√2 Un as before increased by the capacitors.
9.Applicable standard: GB/T 12747-2004, IEC60831-2002.
PART NUMPER EXAMPLE
| CJCC | Menovité napätie(kV) | Menovitý výstup (vľavo) | Rated Capacitor(uF) | Rated Current(A) | H
(mm) |
Output Terminal | Shell Type |
| 0.23-1-1 | 0.23 | 1 | 60.2 | 4.3 | 125 | M6 | A2 | |
| 0.23-3-1 | 0.23 | 3 | 180.5 | 13 | 125 | M6 | A2 | |
| 0.23-5-1 | 0.23 | 5 | 301 | 21.7 | 125 | M6 | A2 | |
| 0.23-7.5-1 | 0.23 | 7.5 | 451.5 | 32.6 | 210 | M8 | A2 | |
| 0.23-10-1 | 0.23 | 10 | 602 | 43.5 | 210 | M8 | A2 | |
| 0.23-15-1 | 0.23 | 15 | 903 | 65.2 | 210 | M8 | B2 | |
| 0.23-20-1 | 0.23 | 20 | 1203.4 | 87 | 260 | M8 | B2 | |
| 0.23-25-1 | 0.23 | 25 | 1504.3 | 108.7 | 330 | M10 | B2 | |
| 0.23-30-1 | 0.23 | 30 | 1805.2 | 130.4 | 230 | 2*M10 | C | |
| 0.4-4-1 | 0.4 | 4 | 79.6 | 10 | 125 | M6 | A2 | |
| 0.4-5-1 | 0.4 | 5 | 99.5 | 12.5 | 125 | M6 | A2 | |
| 0.4-6-1 | 0.4 | 6 | 119.4 | 15.0 | 125 | M6 | A2 | |
| 0.4-7.5-1 | 0.4 | 7.5 | 149.2 | 18.8 | 125 | M6 | A2 | |
| 0.4-8-1 | 0.4 | 8 | 159.2 | 20.0 | 125 | M6 | A2 | |
| 0.4-10-1 | 0.4 | 10 | 198.9 | 25 | 180 | M6 | A2 | |
| 0.4-12-1 | 0.4 | 12 | 238.7 | 30 | 180 | M6 | A2 | |
| 0.4-14-1 | 0.4 | 14 | 278.5 | 35 | 210 | M6 | A2 | |
|
Page3-5 |
| 0.4-15-1 | 0.4 | 15 | 298.4 | 37.5 | 210 | M6 | A2 | |
| 0.4-16-1 | 0.4 | 16 | 318.3 | 40 | 210 | M6 | A2 | |
| 0.4-18-1 | 0.4 | 18 | 358.1 | 45.0 | 210 | M8 | B2 | |
| 0.4-20-1 | 0.4 | 20 | 397.9 | 50 | 210 | M8 | B2 | |
| 0.4-22-1 | 0.4 | 22 | 437.7 | 55 | 210 | M8 | B2 | |
| 0.4-25-1 | 0.4 | 24 | 497.4 | 62.5 | 210 | M8 | B2 | |
| 0.4-30-1 | 0.4 | 30 | 596.8 | 75 | 260 | M8 | B2 | |
| 0.4-35-1 | 0.4 | 35 | 696.3 | 87.5 | 330 | M8 | B2 | |
| 0.4-40-1 | 0.4 | 40 | 796.2 | 100 | 330 | M8 | B2 | |
| 0.4-45-1 | 0.4 | 45 | 895.2 | 112.5 | 230 | 2*M10 | C | |
| 0.4-50-1 | 0.4 | 50 | 995.2 | 125 | 230 | 2*M10 | C | |
| 0.4-60-1 | 0.4 | 60 | 1194.3 | 150 | 280 | 2*M10 | C | |
| 0.45-4-1 | 0.45 | 4 | 62.9 | 8.9 | 125 | M6 | A2 | |
| 0.45-5-1 | 0.45 | 5 | 78.6 | 11.1 | 125 | M6 | A2 | |
| 0.45-6-1 | 0.45 | 6 | 94.3 | 13.3 | 125 | M6 | A2 | |
| 0.45-7.5-1 | 0.45 | 7.5 | 117.9 | 16.7 | 125 | M6 | A2 | |
| 0.45-8-1 | 0.45 | 8 | 125.8 | 17.8 | 125 | M6 | A2 | |
|
Page4-5 |
| 0.45-10-1 | 0.45 | 10 | 157.2 | 22.2 | 180 | M6 | A2 |
| 0.45-12-1 | 0.45 | 12 | 188.6 | 26.7 | 180 | M6 | A2 |
| 0.45-14-1 | 0.45 | 14 | 220.1 | 31.1 | 210 | M8 | A2 |
| 0.45-15-1 | 0.45 | 15 | 235.8 | 33.3 | 210 | M8 | A2 |
| 0.45-16-1 | 0.45 | 16 | 251.5 | 35.6 | 210 | M8 | A2 |
| 0.45-18-1 | 0.45 | 18 | 282.9 | 40 | 210 | M8 | A2/B2 |
| 0.45-20-1 | 0.45 | 20 | 314.4 | 44.4 | 210 | M8 | A2/B2 |
| 0.45-22-1 | 0.45 | 22 | 345.8 | 48.9 | 210 | M8 | B2 |
| 0.45-25-1 | 0.45 | 25 | 393.2 | 55.6 | 210 | M8 | B2 |
| 0.45-30-1 | 0.45 | 30 | 471.8 | 66.7 | 210 | M8 | B2 |
| 0.45-35-1 | 0.45 | 35 | 550.2 | 77.8 | 260 | M8 | B2 |
| 0.45-40-1 | 0.45 | 40 | 629.1 | 88.9 | 260 | M8 | B2 |
| 0.45-45-1 | 0.45 | 45 | 707.4 | 100 | 230 | M10 | C |
| 0.45-50-1 | 0.45 | 50 | 786.3 | 111.1 | 230 | 2* M10 | C |
| 0.45-60-1 | 0.45 | 60 | 943.6 | 133.3 | 230 | 2*M10 | C |
Zavedenie
Samoliečebný nízkonapäťový kondenzátor značky JINPEI vyrobený z pokročilého metalizovaného filmu, is produced strictly in accordance with the Nation Standard and IEC standard by he introduced advanced foreign techniques and equipment. The device is suitable for
low voltage power network to improve power factor, reduce reactive loss and better the voltage quality.












