Keramický disk s vysokým napätím |50V ~ 10KV | Ccdb

Funkcie
Teplotný rozsah:-55~ 125 ℃

Rate Volateg:50~10KV

Kapacita: 80pF~100nF

APPLICATION

•By-Pass & Spojka
Frequency Discriminating Circuits where Q and capacitance stability is not of major importance.
•Filtering, Blocking & Timing

PRÍKLAD ČÍSLA ČASTI

ELECTRICAL CHARACTERISTICS

Technical Data	Podmienka	Špecifikácia
Kapacita	Measured at 1KHz 1.0 ~ 5.0 VRMS, 25° C	80pF ~ 0.1µF
Prevádzková teplota	X7r	-55°C ~ +125°C
	Y5E, Y5P	-30°C ~ +85 °C
	Z5U, Z5V	-10°C ~ +85 °C
Rozptyl (tan S)	X7r, Y5E, Y5P, Z5U	< 0.025
	Z5V	< 0.05
Izolačný odpor	Rated Voltage at 25°C + >°C and 70% R.H. max	>10GΏ or 200MΏ Farad, čo je menej
Encapsulation	Standard 1KV andhigher	Phenolic Wax Epoxy Coating
Solderability of Leads	at least 75% is covered	Solder Temperature 250° C + 5° C Dipping: 3+0.5 sek (Flur shall be used)

 

TEMPERATURE COEFFICIENT CODE

Teplotné charakteristiky
kód	EIACode	Charakteristika
M	Z5U	+22 do -56% +10 °C až +85 °C
Vložka	Z5V	+22 do -82% +10 °C až +85 °C
G	Y5E	+4.7% -30 °C to+85°C
P	Y5P	+10% -30 °C to+85°C
E	Y5U	+22 do -56% -30 °C až +85 °C

 

RADIAL STRAIGHT-LEAD ON TAPE (S56 LEAD CODE)

RADIAL KINK-IN ON TAPE (K56 LEAD CODE)

*Most Popular

kód	Rozmery
D	11.0 max
d	0.6 ±0.05
P	12.7 ±1.0
P0	12.7 ±0,3
P1	3.85 ±0.7
P2	6.35 ±1.3
F	5.0 +0.8 -0.2
h	0 ±2.0
W	18.0 +1.0 -0.5
W1	9.0 +0.75 -0.5
W2	3.0 max
H	18.0 +3.0 -0
H0	16.0 ±0,5
H1	32.25 max
K	1.0 max
D0	4.0 ±0,2
t	0.7 ±0,2
L	11.0 max

Zavedenie
Single layer metalized ceramic disc with resin
coating (impregnované voskom) below 1KV or epoxy
coated 1KV up.
Range of values extends to much higher values
than CCDE