Metallized Polyester Film Capacitor Mini Size | CD
CDAF Series are constructed with metalized polyester film dielectric, praškasti premaz z bakrenim svincem in epoksi smolo. Primerni so za blokado, sklopka, ločevanje, filtriranje, bypass timing circuit and ideal for use in telecommunication equipment, data processing equipment, industrijski instrument, avtomatski nadzorni sistemi in druga splošna elektronska oprema.
Lastnosti
◆ Delovna temp. Razpon :-40°C ~ +125 °C (Derates over 105°C)
◆ Območje kapacitivnosti:0.001~1.2uF
◆ Toleranca kapacitivnosti: J=5% K=10% M=20%
◆ Nazivna napetost V R 85°C: 50V, 63V,100Vdc, 250Vdc, 400Vdc, 450Vdc, 630Vdc,1000Vdc
PRIMER ŠTEVILKE DELA
TOLERANCA
| Koda | Strpnost |
| J | ± 5% |
| K | ± 10% |
| M | ±20 % |
PRIMERI VODILNEGA SLOGA
KODA KAPACITETE
| F | 0.01 | 0.047 | 0.1 | 0.47 | 1.0 |
| pF | 10000 | 47000 | 100000 | 470000 | – |
| Koda | 103 | 473 | 104 | 474 | 105 |
NAZIVNA NAPETOST
| WV | 50 | 63 | 100 | 250 | 400 | 630 |
| Koda | 1H | 1J | 2A | 2E | 2G | 2J |
EMBALAŽA
| Meth | od | V razsutem stanju | Strelivo | Kolut |
| Koda | B | A | R | |
DOLŽINA VODILA OD SEDEŽNE RAVNINE
(Bulk Pack)
| mm | 5 | 10 | 15 | 20 | 25 |
| Koda | 050 | 100 | 150 | 200 | 250 |
TAPE CODE (Razmik med trakom)
| Spac | g | 5mm |
| Pakiranje | A ali R | |
| Koda | RT1 (See Diagram) | |
VODILNI SLOG
| Koda | Slog |
| S | Naravnost |
| K | Kink-In (Stand Off) |
| F | Form Out |
| jaz | Obrazec In |
** For Bulk packaging with formed leads, add an additional 3 digit lead spacing code at end of part number.
MAKSIMALNE DIMENZIJE (mm)
| W. V. | 50 / 63VDC (1H/1J) | 100VDC(2A) | 250VDC(2E) | 400VDC(2G) | 630VDC (2J) | ||||||||||||||||||||
| ( μF) | code | W | H | T | Str | d | W | H | T | Str | d | W | H | T | Str | d | W | H | T | Str | d | W | H | Str | d |
| 0.001 | 102 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 5 | 0.5 |
| 0.0022 | 122 | 6.5 | 6.5 3.5 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 5 | 0.5 | ||
| 0.0033 | 332 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 5 | 0.5 |
| 0.0047 | 472 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 5 | 0.5 |
| 0.0056 | 562 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | ||||
| 0.0068 | 682 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | ||||
| 0.0082 | 822 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | ||||
| 0.010 | 103 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | ||||
| 0.012 | 123 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | |||||||||
| 0.015 | 153 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | |||||||||
| 0.018 | 183 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | |||||||||
| 0.022 | 223 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | |||||||||
| 0.027 | 273 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 3.5 | 5 | 0.5 | |||||||||
| 0.033 | 333 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.039 | 393 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.047 | 473 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.056 | 563 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.068 | 683 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.082 | 823 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.1 | 104 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.12 | 124 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 10 | 5.0 | 5 | 0.5 | |||||||||
| 0.15 | 154 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 10 | 5.0 | 5 | 0.5 | |||||||||
| 0.18 | 184 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 10 | 6.0 | 5 | 0.5 | |||||||||
| 0.22 | 224 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 10 | 6.0 | 5 | 0.5 | |||||||||
| 0.27 | 274 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 10.5 | 7.0 | 5 | 0.5 | |||||||||
| 0.33 | 334 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 11 | 7.0 | 5 | 0.5 | |||||||||
| 0.39 | 394 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 12 | 8.0 | 5 | 0.5 | |||||||||
| 0.47 | 474 | 7.0 | 7.5 | 4.5 | 5 | 0.6 | 7.0 | 7.5 | 4.5 | 5 | 0.6 | 7.5 | 12 | 8.5 | 5 | 0.5 | |||||||||
| 0.56 | 564 | 7.0 | 8.5 | 5.0 | 5 | 0.6 | 7.0 | 8.5 | 5.0 | 5 | 0.6 | ||||||||||||||
| 0.68 | 684 | 7.0 | 8.5 | 5.0 | 5 | 0.6 | 7.0 | 8.5 | 5.0 | 5 | 0.6 | ||||||||||||||
| 1.0 | 824 | 7.0 | 8.5 | 5.0 | 5 | 0.6 | 7.0 | 10 | 6.0 | 5 | 0.6 | ||||||||||||||
| 1.5 | 155 | 7.0 | 10.0 | 6.5 | 5 | 0.5 | 7.0 | 10 | 6.0 | 5 | 0.6 | 17 | 15 | 7.0 | 15 | 0.8 | |||||||||
| 2.2 | 225 | 7.0 | 10.0 | 6.5 | 5 | 0.6 | 7.0 | 10.5 | 7.0 | 5 | 0.6 | 17 | 15.5 | 6.5 | 15 | 0.8 | |||||||||
ZMOGLJIVOST
| Postavka | Metalizirano Poliester |
| Odmik kapacitivnosti | Kroženje skozi območje delovne temperature 2%. |
| Test vlažnosti | Will withstand the test of R.H. 95% at 40°C for 1000hrs. C < 5% DF < 1.2% IN > 10000MΩ |
| Preizkus obremenitve | Will withstand a testing voltage at 140% od W.V. for 1000hrs at 85°C. C < 5% DF < 1.2% IN > 5000MΩ |
| Lead Pull Test | Will withstand a pull of 1.5Kg applied axialy for 10 sekunde. |
|
Preskus upogiba svinca |
Will sustain two cycles without breaking when attaching a load of 0.5Kg to the end of the lead and then rotating the capacitor 90º from the direction of lead egress. Then 180 in opposite direction, then back to the starting point. |
| Spajkanje | Potopljen v staljeno spajko (230 + 0.5 sec.) after testing, navojni vodnik in vrzel v navitem kablu bosta prekrita in zapolnjena s spajkanjem. Will be difficult to unwind byfinger. |
| Dielectric Strength | Zdrži 200% oz 160% of rated voltage at 25°C for 1 minute with current limiting resistance of 1 Oh
/ V. |
SPAJKANJE
Območje pod krivuljo je priporočeni čas spajkanja & temp. za prikazane materiale
RADIALNO LEPENJE
SPECIFIKACIJE
| Opis |
Pismo |
Dimenzija (mm) |
| RT1 | ||
| Premer vodilne žice | d | 0.5 / 0.6 |
| Tapping Pitch | Str | 12.7 |
| Nagib dovodne luknje | PO | 12.7 |
| Centriranje vodilne žice | P1 | 3.85 |
| Centriranje telesa | P2 | 6.35 |
| Razmik med vodili (Pitch) | F | 5 |
| Poravnava komponent | ∆h | 0 |
| Višina komponente iz središča traku | H | 18.5 |
| Širina nosilnega traku | W | 18 |
| Pridržite širino traku | WO | 6 |
| Položaj luknje | W1 | 9 |
| Pridržite položaj traku | W2 | 3 |
| Premer dovodne luknje | naredi | 4 |
| Debelina traku | t | 0.7 |
| Slika | fig | 1 oz 2 |
Opomba: *Dopust akumuliranega koraka manj kot 1 mm pri vsoti 20 igrišča.
*Neprekinjena prazna komponenta manj kot 3 zaporednih kosov.
*Skupno prazno na enem kolutu manj kot 1%.
Uvod
CDAF Series are constructed with metalized polyester film dielectric, praškasti premaz z bakrenim svincem in epoksi smolo. Primerni so za blokado, sklopka, ločevanje, filtriranje, bypass timing circuit and ideal for use in telecommunication equipment, data processing equipment, industrijski instrument, avtomatski nadzorni sistemi in druga splošna elektronska oprema.
