Condensatore di film in poliestere metallizzato | ESR ridotto al minimo | CA
CDAA series is constructed with polyester film dielectric, aluminum foil electrode, copperply lead, and epoxy resin coating. They are suitable for blocking, by-pass and coupling of DC and signal to VHF range, timing circuits,filtraggio, and other general purpose usage.
They are also ideal for use in amplifiers, TV, radio, stereo equipment and other electronic equipments.
CARATTERISTICHE
◆ High moisture resistance
◆ Unilaterallead-out
◆ Good insulating performance
◆ ESR is minimized
◆ Rated Voltage 100~1200Vdc
Esempio di numero di parte
ELECTRICAL CHARACTERISTICS
| Elementi | Prestazione |
| Intervallo di tensione operativa | 100Vcc, 250Vcc, 400Vcc, 630Vcc, 1200Vcc |
| Temperatura nominale | -55˚C ~ +105˚C (Derates over 85˚C) |
| Categoria climatica | 55 / 105 / 21 |
| Gamma di capacità | 0.001 µF ~ 0.27 µF |
| Tolleranza di capacità | 5% (J), 10% (K), 20%(M) |
| Fattore di dissipazione | ≤ 1.0% (1KHz, 20° C.) |
| Insulation Resistance
Da terminale a terminale |
≥ 30000MΩ, CR ≤ 0.1μF (20° C., 10V, 1min)
≥ 10000MΩ, CR > 0.1µF (20° C., 100V, 1min) |
| Resistere alla tensione | 2.0UR : (5S) |
SALDATURA
L'area sotto la curva rappresenta il tempo di saldatura consigliato & temp. per i materiali illustrati.
| (µF) | W.V. DC | 50V (1H) / 63V (1J) / 100V (2UN) | 250V (2E) | 400V (2G) | ||||||||||||
| Codice | W | H | T | P | D | W | H | T | P | D | W | H | T | P | D | |
| 0.001 | 102 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 |
| 0.0012 | 122 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 |
| 0.0015 | 152 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 |
| 0.0018 | 182 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 |
| 0.0022 | 222 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 |
| 0.0027 | 272 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 | 6.5 | 12.0 | 4.0 | 3.5 | 0.5 | 7.0 | 13.0 | 4.0 | 4.0 | 0.5 |
| 0.0033 | 332 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 | 6.5 | 12.0 | 4.0 | 3.5 | 0.5 | 7.0 | 13.0 | 4.5 | 4.5 | 0.5 |
| 0.0039 | 392 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 | 6.5 | 12.0 | 4.0 | 4.0 | 0.5 | 7.5 | 13.5 | 4.5 | 4.5 | 0.5 |
| 0.0047 | 472 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 | 6.5 | 12.0 | 4.0 | 4.5 | 0.5 | 8.0 | 13.5 | 4.5 | 4.5 | 0.5 |
| 0.0056 | 562 | 6.0 | 11.5 | 4.0 | 4.0 | 0.5 | 7.0 | 12.0 | 4.0 | 5.0 | 0.5 | 8.0 | 13.5 | 5.0 | 5.5 | 0.5 |
| 0.0068 | 682 | 6.5 | 11.5 | 4.0 | 4.0 | 0.5 | 7.0 | 12.0 | 4.0 | 5.0 | 0.5 | 8.5 | 13.5 | 5.5 | 5.5 | 0.5 |
| 0.0082 | 822 | 7.0 | 11.5 | 4.0 | 4.0 | 0.5 | 8.0 | 13.0 | 4.0 | 5.5 | 0.5 | 9.0 | 15.5 | 5.5 | 5.5 | 0.5 |
| 0.01 | 103 | 7.0 | 11.5 | 4.5 | 4.0 | 0.5 | 8.0 | 13.0 | 5.0 | 5.5 | 0.5 | 9.5 | 15.5 | 6.0 | 5.5 | 0.5 |
| 0.012 | 123 | 7.0 | 11.5 | 4.5 | 4.0 | 0.5 | 8.5 | 13.5 | 5.0 | 5.5 | 0.5 | 10.5 | 15.5 | 6.5 | 6.0 | 0.5 |
| 0.015 | 153 | 7.0 | 11.5 | 4.5 | 4.5 | 0.5 | 8.5 | 13.5 | 5.0 | 5.5 | 0.5 | 10.5 | 15.5 | 6.5 | 6.5 | 0.5 |
| 0.018 | 183 | 7.0 | 12.0 | 4.5 | 4.5 | 0.5 | 9.0 | 14.0 | 6.0 | 6.0 | 0.5 | 11.5 | 17.5 | 7.0 | 7.0 | 0.5 |
| 0.022 | 223 | 8.0 | 12.0 | 4.5 | 5.0 | 0.5 | 9.5 | 14.0 | 6.0 | 6.5 | 0.5 | 11.5 | 17.5 | 7.0 | 7.0 | 0.5 |
| 0.027 | 273 | 8.0 | 13.0 | 5.0 | 5.0 | 0.5 | 10.0 | 15.0 | 6.5 | 6.5 | 0.5 | 12.5 | 18.5 | 7.5 | 7.5 | 0.5 |
| 0.033 | 333 | 8.5 | 13.0 | 5.0 | 5.5 | 0.5 | 10.5 | 15.5 | 6.5 | 6.5 | 0.5 | 12.5 | 18.5 | 7.5 | 7.5 | 0.5 |
| 0.039 | 393 | 9.0 | 13.0 | 5.0 | 5.5 | 0.5 | 11.5 | 15.5 | 7.0 | 7.0 | 0.5 | 14.0 | 19.0 | 8.0 | 8.5 | 0.5 |
| 0.047 | 473 | 9.0 | 13.0 | 5.5 | 5.5 | 0.5 | 11.5 | 16.0 | 7.0 | 7.5 | 0.5 | 14.5 | 19.0 | 8.5 | 9.0 | 0.5 |
| 0.056 | 563 | 9.5 | 13.5 | 5.5 | 6.5 | 0.5 | 12.5 | 16.0 | 8.5 | 8.0 | 0.5 | 14.5 | 21.5 | 8.5 | 9.0 | 0.5 |
| 0.068 | 683 | 10.0 | 13.5 | 6.0 | 7.0 | 0.5 | 12.5 | 17.0 | 8.5 | 8.0 | 0.5 | 14.5 | 22.5 | 9.0 | 9.5 | 0.5 |
| 0.082 | 823 | 10.5 | 13.5 | 6.5 | 7.0 | 0.5 | 14.0 | 19.0 | 10.0 | 8.5 | 0.5 | |||||
| 0.1 | 104 | 11.5 | 13.5 | 7.0 | 7.5 | 0.5 | 15.0 | 19.0 | 10.0 | 9.0 | 0.5 | |||||
| 0.12 | 124 | 12.5 | 15.5 | 7.5 | 8.5 | 0.5 | ||||||||||
| 0.15 | 154 | 13.5 | 16.0 | 8.0 | 9.0 | 0.5 | ||||||||||
| 0.18 | 184 | 14.0 | 16.5 | 8.0 | 9.5 | 0.5 | ||||||||||
| 0.22 | 224 | 14.5 | 17.5 | 8.5 | 9.5 | 0.5 | ||||||||||
| 0.27 | 274 | 15.0 | 21.0 | 9.0 | 10.0 | 0.5 | ||||||||||
| (µF) | W.V. DC | 630VCC (2J) | 1200VCC (3B) | ||||||||
| Codice | W | H | T | P | D | W | H | T | P | D | |
| 0.001 | 102 | 6.5 | 12.5 | 4.0 | 3.5 | 0.5 | 7.0 | 13.5 | 4.5 | 4.0 | 0.5 |
| 0.0012 | 122 | 6.5 | 12.5 | 4.0 | 3.5 | 0.5 | 7.0 | 13.5 | 4.5 | 4.0 | 0.5 |
| 0.0015 | 152 | 6.5 | 12.5 | 4.0 | 3.5 | 0.5 | 7.5 | 13.5 | 4.5 | 4.5 | 0.5 |
| 0.0018 | 182 | 6.5 | 12.5 | 4.0 | 3.5 | 0.5 | 7.5 | 13.5 | 4.5 | 4.5 | 0.5 |
| 0.0022 | 222 | 7.0 | 12.5 | 4.5 | 4.5 | 0.5 | 8.0 | 14.0 | 5.0 | 5.0 | 0.5 |
| 0.0027 | 272 | 7.5 | 13.5 | 5.0 | 4.5 | 0.5 | 8.0 | 14.0 | 5.5 | 5.0 | 0.5 |
| 0.0033 | 332 | 7.5 | 13.5 | 5.0 | 4.5 | 0.5 | 9.0 | 14.0 | 6.0 | 5.5 | 0.5 |
| 0.0039 | 392 | 8.0 | 13.5 | 5.5 | 5.0 | 0.5 | 9.5 | 15.0 | 6.0 | 6.0 | 0.5 |
| 0.0047 | 472 | 8.5 | 13.5 | 5.5 | 5.0 | 0.5 | 9.5 | 16.0 | 6.0 | 6.0 | 0.5 |
| 0.0056 | 562 | 9.5 | 14.0 | 5.5 | 5.5 | 0.5 | 10.0 | 16.5 | 6.5 | 6.0 | 0.5 |
| 0.0068 | 682 | 10.0 | 14.0 | 6.0 | 6.0 | 0.5 | 10.5 | 16.5 | 6.5 | 6.5 | 0.5 |
| 0.0082 | 822 | 10.0 | 16.0 | 6.0 | 6.0 | 0.5 | 11.5 | 17.5 | 7.5 | 7.5 | 0.5 |
| 0.01 | 103 | 10.0 | 16.0 | 6.5 | 6.0 | 0.5 | 12.0 | 17.5 | 7.5 | 7.5 | 0.5 |
| 0.012 | 123 | 11.0 | 16.5 | 6.5 | 7.0 | 0.5 | |||||
| 0.015 | 153 | 11.5 | 17.0 | 7.0 | 7.5 | 0.5 | |||||
| 0.018 | 183 | 12.0 | 17.5 | 7.5 | 7.5 | 0.5 | |||||
| 0.022 | 223 | 12.5 | 18.0 | 7.5 | 8.0 | 0.5 | |||||
PRESTAZIONE
| Articolo | Test Metodi | Requisiti |
|
Resistance to Soldering Heat |
Bagno di saldatura: 260°C± 5°C Immersion Time: 10sec ± 1sec |
Capacitance Change ∆C/C ≤ 5% DF Change ∆ tanδ ≤ 1% a 1 KHz IR
≥ 50% spec value |
|
Resistance to Vibration |
Gamma di frequenza: 10 ~ 500Hz Amplitude: 0.75m/m Duration: 6 ore | There shall be no Visible Damage No Intermittent Contact,
Nessun circuito aperto o cortocircuito |
|
Damp heat, Steady State |
Temperatura: 55° C.
Umidità relativa: 90% A 95% Durata: 21 Days |
Capacitance Change ∆C/C ≤ 5%
DF Change ∆ tanδ ≤ 1% a 1 KHz IR ≥ 50% spec value |
|
Electrical Endurance |
Temperatura: 105° C.
Voltage Applied: 1.25 xVer (DC) Durata: 1,000 ore |
Capacitance Change ∆C/C ≤ 1% DF Change ∆ tanδ ≤ 1% a 1 KHz IR
≥ 50% spec value |
CODICE DI CAPACITÀ
| µF | 0.001 | 0.0047 | 0.01 | 0.047 | 0.1 | 0.27 |
| pF | 1000 | 4700 | 10000 | 47000 | 100000 | 270000 |
| Codice | 102 | 472 | 103 | 473 | 104 | 274 |
Tensione nominale
| W V | 100 | 250 | 400 | 630 | 1200 |
| Codice | 2UN | 2E | 2G | 2J | 3B |
DISTANZA RADIALE DEI CONDUTTORI
*Leadspace è uno spazio lead originale non formato con derivazione diretta.
| Lead S | pacing | 5.0mm | 7.5mm | 10mm |
| Codice | 050 | 075 | 100 | |
CODICE NASTRO (Spaziatura del nastro)
*see diagram on page 4
| Lead Spacing | 5.0mm | 7.5mm | 10mm |
| Tape Packing | UN | UN | UN |
| Codice | RT1 | RT2 | RT3 |
LUNGHEZZA CAVO DAL PIANO DI SEDUTA
(Bulk Pack)
| mm | 5 | 10 | 15 | 20 |
| Codice | 50 | 100 | 150 | 250 |
TOLERANCE
| Codice | Tolleranza |
| J | ± 5% |
| K | ± 10% |
| M | ±20% |
LEAD STYLE EXAMPLES
RADIAL TAPING CODE DIAGRAM
Specifiche
| Descrizione |
Letter |
Dimensione (mm) | |||
| RT1 | RT2 | RT3 | Tol. | ||
| Lead Wire Diameter | D | 0.5 / 0.6 | 0.5 / 0.6 | 0.6 | + 0.05 |
| Tape Pitch | P | 12.7 | 12.7 | 12.7 | + 1 |
| Feed Hole Pitch | PO | 12.7 | 12.7 | 12.7 | + 0.2 |
| Centering of the Lead Wire | P1 | 3.85 | 2.6 / 3.75 | 7.7 | + 0.7 |
| Centering of the Body | P2 | 6.35 | 6.35 | 12.7 | + 1.3 |
| Lead Spacing (Pitch) | F | 5 | 7.5 | 10 | + 0.6; -0.1 |
| Component Alignment | ∆h | 0 | 0 | 0 | + 2 |
| Height of Componenet from Tape Center | H | 18.5 | 18.5 | 18.5 | + 0.5 |
| Carrier Tape Width | W | 18 | 18 | 18 | + 1; -0.5 |
| Hold Down Tape Width | WO | 6 | 6 | 9 | Min |
| Hole Position | W1 | 9 | 9 | 9 | + 0.5 |
| Hold Down Tape Position | W2 | 3 | 3 | 3 | Massimo |
| Feed Hole Diameter | Do | 4 | 4 | 4 | + 0.2 |
| Tape Thickness | T | 0.7 | 0.5 | 0.5 | + 0.2 |
| Figure | fig | 1 O 2 | 1.2 O 3 | 4 | |
Osservazione: *Allowance of accumulated pitch less than 1mm at the sum of 20 pitches.
*Continuous empty component less than 3 consecutive pieces.
*Total empty on one reel less than 1%.
INTRODUZIONE
CDAA series is constructed with polyester film dielectric, aluminum foil electrode, copperply lead, and epoxy resin coating. Sono adatti per il blocco, by-pass and coupling of DC and signal to VHF range, timing circuits, filtraggio, and other general purpose usage.
They are also ideal for use in amplifiers, TV, radio, stereo equipment and other electronic equipments.
