Condensatore a disco ceramico |12V ~ 50V | CCDC
INTRODUZIONE
Single layer metalized ceramic disc with resin coating (impregnato di cera).
CCDCis suitable for low voltage application and offers larger capacitance values
Single layer metalized ceramic disc with resin coating (impregnato di cera).
CCDCis suitable for low voltage application and offers larger capacitance values
CARATTERISTICHE
Intervallo di temperatura:-30~85℃
Rate Volateg:12~50V
Capacità: 1000pF~470nF
APPLICATION
• Transistorized Circuits
• Low Voltage-by-pass, Accoppiamento.
• Determinazione della frequenza in caso di perdite dielettriche, Hi-IR and Cap. stability are not of major importance
Esempio di numero di parte
ELECTRICAL CHARACTERISTICS
| Dati tecnici | Condition | Specifica |
| Capacità | Measured at 1KHz 0.05 VRMS, 25°C ± 2°C | 0.01uF-0.47uF |
| Temperatura operativa | Y5U, Y5V, Y5P | -30° C ~ + 85° C. |
| Fattore di dissipazione
(tanS) |
Y5U, Y5V, Y5P | < 0.05 |
| Resistenza di isolamento | rated voltage at 25°C ± >°C and 70% R.H max 16Vdc,
product voltage is 25Vdc |
>1GΩ or 20MΩ Farad, qualunque sia inferiore |
| Encapsulation | Standard | Phenolic Wax Epoxy Coating |
| Solderability of Leads | at least 75 % covered | Solder temperature 250°C ± 5°C Dipping: 3±0.5 sec
(Flur shall be used) |
TEMPERATURE COEFFICIENT CODE
| Caratteristiche della temperatura | ||
| Codice | EIA Code | Caratteristiche. |
| P | Y5P | ±10 % -30°C to +85°C |
| E | Y5U | +22 A -56% -30°C to +85°C |
| F | Y5V | +22 A -82% -30°C to +85°C |
TOLERANCE CODE
| Codice | Tolleranza |
| C | ±0.25pF |
| D | ±0.5pF |
| F | ±1%pF |
| G | ±2% |
| J | ± 5% |
| K | ± 10% |
| M | ±20% |
VOLTAGE CODE EXAMPLE
| Codice | 1B | 1H |
| WVDC | 12V | 50V |
RADIAL STRAIGHT-LEAD ON TAPE (S56 LEAD CODE)
RADIAL KINK-IN ON TAPE (K56 LEAD CODE)
*Most Popular
| Codice | Dimensioni |
| D | 11.0 massimo |
| D | 0.6 ±0.05 |
| P | 12.7 ±1.0 |
| P0 | 12.7 ±0.3 |
| P1 | 3.85 ±0.7 |
| P2 | 6.35 ±1.3 |
| F | 5.0 +0.8 -0.2 |
| Dh | 0 ±2.0 |
| W | 18.0 +1.0 -0.5 |
| W1 | 9.0 +0.75 -0.5 |
| W2 | 3.0 massimo |
| H | 18.0 +3.0 -0 |
| H0 | 16.0 ±0.5 |
| H1 | 32.25 massimo |
| K | 1.0 massimo |
| D0 | 4.0 ±0,2 |
| T | 0.7 ±0,2 |
| l | 11.0 massimo |
LEAD CODES FOR BULK PACK (CERAMIC DISC ONLY)
| Lead Type | ||||
| A-Straight | C-Kink In | D-Kink Out | ||
| 3.0mm |
4.8mm max 4.8±1mm |
|||
| 4.8mm max | ||||
| 4.8±1mm | ||||
| F-Special Length | Y-Y Formed | S & K-Taped | ||
|
Per Customer Specifica |
4.0 mmmax 4.8 ±1.0 mm |
See taping specifications
above. |
||
| Lead Spacing
(±1.00) in mm |
Wire dia.
(±0.05) inmm |
||
| Codice | P | Codice | D |
| 2 | 2.5 | 4 | 0.48 |
| 5 | 5 | 6 | 0.6 |
| 6 | 6.35 | 7 | 0.65 |
| 7 | 7.5 | 8 | 0.8 |
| 9 | 10.0 | 9 | 1.0 |
| 0 | 12.7 | ||
| UN | 15.0 | ||
INTRODUZIONE
Single layer metalized ceramic disc with resin
coating (impregnato di cera).
CCDCis suitable for low voltage application
and offers larger capacitance values















