Gemetalliseerde polyester filmcondensator |Hoge vochtweerstand | CDAC

FUNCTIES

◆ Operating Temp. Bereik :-40°C~105°C (V R Derates 1.25% per °C over85°C)
◆ Capacitance Range:0.1~10uF
◆ Capaciteitstolerantie: J=5% K=10% M=20%
◆ Rated Voltage V R 85°C: 100V 250V 400V 630V
◆ Dissipation Factor: 1% MAX @1KHZ 25℃

VOORBEELD ONDERDEELNUMMER

CAPACITANCE CODE

F	0.01	0.047	0.1	0.47	1.0	4.7	10
pF	10000	47000	100000	470000	–	–	–
Code	103	473	104	474	105	475	106

NOMINALE SPANNING

WV	100	250	400	630
Code	2A	2E	2G	2J

Meth	D	Bulk	Munitie	Haspel
Code		B	A	R

Spacin	G	7.5mm	10mm	15mm
Verpakking		A of R	A	A
Code		RT2	RT3	RT4

RADIALE LEAD-RUIMTE

* Leadspace is een rechte, niet-gevormde originele leadspace.

mm		7.5	10	15	20	27.5	32.5	37.5	42.5
Code		075	100	150	200	275	325	375	425

LEIDLENGTE VAN ZITPLAATS

mm	5	10	15	20	25
Code	050	100	150	200	250

 

LEIDENDE STIJL

Code	Stijl
S	Direct
K	Knik-in (Sta af)
F	Vorm uit
I	Vorm In

MAXIMALE AFMETINGEN (mm)

(µF)	Code	W	H	T	P	d Φ	W	H	T	P	dΦ	W	H	T	P	dΦ	W	H	T	P	dΦ
0.01	103	10.5	9.0	5.5	7.5	0.6	10.5	9.0	5.5	7.5	0.6	10.5	9.0	5.5	7.5	0.6	13.0	10.0	6.0	10.0	0.6
0.015	153	10.5	9.5	6.0	7.5	0.6	10.5	9.5	6.0	7.5	0.6	10.5	9.5	6.0	7.5	0.6	13.0	10.5	6.5	10.0	0.6
0.022	223	10.5	9.5	6.0	7.5	0.6	10.5	9.5	6.0	7.5	0.6	13.0	9.5	6.0	10.0	0.6	13.0	12.5	7.5	10.0	0.6
0.033	333	10.5	9.5	6.0	7.5	0.6	10.5	9.5	6.0	7.5	0.6	13.0	10.0	6.5	10.0	0.6	18.5	12.0	6.5	15.0	0.6
0.047	473	10.5	9.5	6.0	7.5	0.6	10.5	9.5	6.0	7.5	0.6	13.0	12.0	7.0	10.0	0.6	18.5	12.5	7.5	15.0	0.6
0.068	683	10.5	9.5	6.0	7.5	0.6	10.5	10.0	6.5	7.5	0.6	13.0	13.0	8.0	10.0	0.6	18.5	14.0	8.5	15.0	0.8
0.1	104	10.5	9.5	6.0	7.5	0.6	13.0	10.0	6.5	10.0	0.6	18.0	12.5	7.0	15.0	0.8	18.5	14.5	10.0	15.0	0.8
0.15	154	13.0	9.0	5.5	10.0	0.6	18.5	11.0	6.0	15.0	0.6	18.5	13.5	8.0	15.0	0.8	23.0	15.0	9.5	20.0	0.8
0.22	224	13.0	10.0	6.5	10.0	0.6	18.5	11.5	6.5	15.0	0.6	22.5	14.5	8.0	20.0	0.8	23.0	15.5	10.0	20.0	0.8
0.33	334	13.0	11.5	8.0	10.0	0.6	18.5	12.0	7.0	15.0	0.8	22.5	15.0	9.0	20.0	0.8	32.0	19.0	12.0	27.5	0.8
0.47	474	18.5	11.0	6.0	15.0	0.6	22.5	12.5	7.5	20.0	0.8	22.5	18.5	11.5	20.0	0.8	32.0	22.0	13.5	27.5	0.8
0.68	684	18.5	12.5	7.5	15.0	0.6	22.5	13.5	8.5	20.0	0.8	32.0	19.0	12.0	27.5	0.8	36.0	22.5	14.5	32.5	0.8
1	105	18.5	13.5	8.5	15.0	0.8	22.5	15.0	10.0	20.0	0.8	32.0	21.5	13.5	27.5	0.8	36.0	29.0	16.0	32.5	0.8
1.5	155	22.5	14.5	8.0	20.0	0.8	32.0	17.5	9.5	27.5	0.8	36.0	23.5	14.0	32.5	0.8	42.0	29.5	18.5	37.5	1.0
2.2	225	22.5	16.5	10.0	20.0	0.8	32.0	19.0	10.5	27.5	0.8	36.0	27.5	18.5	32.5	0.8	46.0	32.5	20.5	42.5	1.0
3.3	335	22.5	20.0	12.0	20.0	0.8	32.0	23.0	13.5	27.5	0.8	42.0	30.5	18.5	37.5	1.0
4.7	475	22.5	21.5	14.0	20.0	0.8	36.0	24.0	14.0	32.5	0.8	46.0	34.0	22.0	42.5	1.0
6.8	685	32.0	23.5	14.5	27.5	0.8	42.0	27.0	16.0	37.5	1.0
10	106	32.0	29.0	18.0	27.5	0.8	42.0	35.0	19.0	37.5	1.0

PERFORMANCE

Item	Metalized Polyester
Capacitance Drift	Cycled through the operating temperature range 2%
Humidity Test	Will withstand the test of R.H. 95% at 40°Cfor 1000hrs. C < 5% DF < 1.2% IR > 10000M
Load Test	Will withstand a testing voltage at 140% of W.V. for 1000hrs at 85 °C. C< 5% DF < 1.2% IR > 5000M
Lead Pull Test	Will withstand a pull of 1.5Kg applied axially for 10 seconden
Lead Bend Test	Will sustain two cycles without breaking when attaching a load of 0.5Kg to the end of the lead and then rotating the capacitor 90°C from the direction of lead egress. Then 180°C in opposite direction. Then back to the starting point.
Solderability	Immersed in molten solder 230 + 0.5sec. After testing, the wound lead and gap in the wound lead will be covered and filled by solder. Will be difficult to unwind by finger.
Diëlektrische sterkte	Shall withstand 200% of 160% of rated voltage at 25°C for 1 minute with current limiting resistance of 1 / V

 

SOLDERING

The area under the curve is the recommended soldering time & temp. for the materials shown.

INVOERING
CDAC Series are constructed with metalized polyester film dielectric, copperply lead and epoxy resin coating. They are suitable for blocking, koppeling, ontkoppeling, filteren, bypass timing circuit and ideal for use in data / telecomm equipment, industrial instrument, automatic control systems and other general electronic application.