أسطوانة مكثف ليثيوم أيون 15AH CKAA60140

جينبي مكثف ليثيوم أيون (LIC) هو نوع جديد من أجهزة تخزين الطاقة الكهربائية التي تجمع بين خصائص بطاريات الليثيوم أيون و المكثفات الفائقة. لديها مزايا كثافة الطاقة العالية, كثافة طاقة عالية, دورة حياة طويلة, إلخ.

لديها مجموعة واسعة من التطبيقات في السيارات الكهربائية, تخزين الطاقة المتجددة, أنظمة تخزين الطاقة الصناعية والمنزلية, وكذلك الأجهزة الإلكترونية والسلع الاستهلاكية. مع التقدم المستمر للتكنولوجيا ومواصلة خفض التكلفة, ومن المتوقع أن يكون تطبيقه في السوق أكثر شمولاً.

1. Introduction

This specification describes the properties, testing methods and notice of the 60140 Flash Charge Lithium ion capacitors developed by Jinpei Electronics Co., المحدودة.

2. General Features

2.1 Features and Advantages

• Fast charge and discharge
• Long cycle life
• Good low temperature performance
• كثافة طاقة عالية

2.2 Typical Applications

Using at Energy storage, Start and stop system,

smart grid, harbor machinery UPS and other power system.

3. Product Appearance & أبعاد

3.1 Structure & Appearance

4. Product Technical Index

4.1Main Parameters

4.2 Other Technical Information

• Low temperature discharge performance Low temperature discharge curves

• 
  

  discharge current (أ)	وقت التفريغ	Discharge capacitance (ماه)
  180	3min58s	11.89
  200	3min12s	10.66
  225	2min47s	10.44

Test method: في درجة حرارة الغرفة, 3C constant current charge to 4.2V, constant voltage to 0.05c cutoff, put in the low-temperature -43℃ environment for 3h, discharge to 2.5V cutoff with different current.

Charge/discharge charge/discharge curves

Test method: في درجة حرارة الغرفة, 3C constant current charge to 4.2V, constant voltage to 0.1c cut-off, use 2min, discharge current 1C to 2.5V cut-off.

Charge/discharge @1000A Discharge curves at large current

حالة الاختبار: 3C charge to 4.2V at normal temperature ,constant voltage to 0.2A cut-off , 1800A charge for 10s,15s interval after charge again,record test datasheet.

5 Testing Methods

5.1 Testing Conditions

This specification followed the standard testing criteria: 1 atm, 25±2 ℃ and a relative humidity < 65%.

5.2 Test for Capacitance/Internal resistance

Capacitance Test: Charge the cell to 4.2V by 1C current and the charge it by constant voltage until the current reached 0.1C. And then, discharge the cell to 2.5V at 1C current. After rested 30s ， repeated the last processes and regarded the second capacitance as cell’s capacitance.

Resistance test: Charge the cell to 4.2V by 3C current and charge until 0.1C current by constant voltage, test it’s ACR at 1kHZ Ac impedance meter. By the way, once test its capacitance, recorded its 10ms voltage difference during the discharge process, and the calculated its DCR by R=ΔU/I. ملحوظة: the mix record time is 1s during the “Capacitance and resistance test “proces

Test for Low Temperature

Under the ordered temperature, constant charge the cell to 4.2V and then end it at 0.1C by constant voltage. بعد هذا, remove the cell to different temperature condition (keep 2h) and discharge it to 2.5V at 1C current, record its discharge capacitance.Cycle life test

Under 25±5℃, test the cell’s original performance by “Capacitance/resistance method”, and then charge it to 4.0V by 5C current, discharge it to 2.5V at 2Cconstant current, after this rest 5min, cycle this processes 2000. Regarded the testing process at one cycle, and repeated it 15 مرات, until it reached 30000 مرات.

6 Notice

6.1 During Operation

• Working temperature of LIB should not exceed the upper and lower limits of the rated
• LIB should be used at rated

Check the polarity of LIB before power on. No reverse connecting.

Keep LIB away from heat. The temperature has a big influence on the working life of LIB(LIC).

مقدمة

◆نطاق السعة:

1100مللي أمبير/2300 فهرنهايت， 1500مللي أمبير/3100 فهرنهايت，1900مللي أمبير/4000 فهرنهايت， 2500مللي أمبير/5200 فهرنهايت

◆الجهد المقدر: 3.6الخامس

◆فولت مرحبا:4.2الخامس

◆فولت-LO:2.5الخامس