Zemsprieguma jaudas kondensators |0.23~ 1,2kvac | CJICA

Raksturlielumi

1.Mazs tilpums, light weight and convenient installation

2.No oil leakage, no-toxic and environment protection

3.Zemi zaudējumi, little radiation and low temperature rise

4.Excellent self-healing performance

5.Safety

Working condition

1.Altitude: lower than 2000m
2.Ambient temperature: -25~50℃degree
3.Mitrums: smaller than 85%
4.After the power cut off, reputing when make sure the remain voltage is smaller than 10% of the rated voltage, usually this time is 200s, so the controller you use should has the function of time delay for reputing after cut off.

Technical data

1.Nominālais spriegums: 230Vakuums, 400Vakuums, 525Vakuums, 690Vakuums, 750Vakuums, 1050Vakuums, 1200Vakuums
2.Rated output: 1-60 KVAR
3.Rated frequency: 50Hz or 60Hz
4.Kapacitātes tolerance: -5% – +10%
5.Tangent of the loss angle: With the power frequency rated voltage,
6.Withstand voltage: Between terminal 2.15 times rated voltage for 5 sekundes, between terminals and container 2 Un+2Kv or 3KVAC choose the higher one for 10 sekundes.
7.Max permissible over-voltage: 110% nominālais spriegums
8.Max permissible over-current: 130% nominālā strāva
9.Self-discharge feature: Less than 50V in 3min after power broke down when the DC is√2 Un as before increased by the capacitors. 11.Applicable standard: GB/T 12747-2004, IEC60831-2002.

PART NUMPER EXAMPLE

SEPERATE PHASE POWER CAPACITOR

	Spriegums(kV)	Output (kvar)	Capacitor(uF)	Pašreizējais(Izšķirt)	(mm)	Terminālis	Tips
0.4-1-3	0.4	1	19.9	1.4	105	M6	A1
0.4-2-3	0.4	2	39.8	2.9	105	M6	A1
0.4-3-3	0.4	3	59.7	4.3	125	M6	A2
0.4-4-3	0.4	4	79.6	5.8	125	M6	A2
0.4-5-3	0.4	5	99.5	7.2	125	M6	A2
0.4-6-3	0.4	6	119.4	8.7	125	M6	A2

0.4-7.5-3	0.4	7.5	149.2	10.8	125	M6	A2
0.4-8-3	0.4	8	159.2	11.6	125	M6	A2
0.4-10-3	0.4	10	198.9	14.4	180	M6	A2
0.4-12-3	0.4	12	238.7	17.3	180	M6	A2
0.4-14-3	0.4	14	278.5	20.2	210	M6	A2
0.4-15-3	0.4	15	298.4	21.7	210	M6	A2
0.4-16-3	0.4	16	318.3	23.1	210	M6	A2
0.4-18-3	0.4	18	358.1	26.0	245/210	M6	A2/B2
0.4-20-3	0.4	20	397.9	28.9	245/210	M6	A2/B2
0.4-22-3	0.4	22	437.7	31.8	210	M8	B2
0.4-24-3	0.4	24	477.5	34.6	210	M8	B2
0.4-25-3	0.4	25	497.4	36.1	210	M8	B2
0.4-28-3	0.4	28	557.3	40.4	260	M8	B2
0.4-30-3	0.4	30	596.8	43.3	260	M8	B2
0.4-35-3	0.4	35	696.3	50.5	260	M8	B2

0.4-40-3	0.4	40	796.2	57.7	320	M8	B2
0.4-45-3	0.4	45	895.2	65.0	210	M10	C
0.4-50-3	0.4	50	995.2	72.2	210	M10	C
0.4-55-3	0.4	55	1094.2	79.4	260	M10	C
0.4-60-3	0.4	60	1194.3	86.6	260	M10	C
0.45-1-3	0.45	1	15.7	1.3	105	M6	A1
0.45-2-3	0.45	2	31.4	2.6	105	M6	A1
0.45-3-3	0.45	3	47.2	3.8	125	M6	A2
0.45-4-3	0.45	4	62.9	5.1	125	M6	A2
0.45-5-3	0.45	5	78.6	6.4	125	M6	A2
0.45-6-3	0.45	6	94.3	7.7	125	M6	A2
0.45-7.5-3	0.45	7.5	117.9	9.6	125	M6	A2
0.45-8-3	0.45	8	125.8	10.3	125	M6	A2
0.45-10-3	0.45	10	157.2	12.8	180	M6	A2
0.45-12-3	0.45	12	188.6	15.4	180	M6	A2

IEVADS
◆JINPEI brand of self-healing type low voltage capacitor made of the advanced metalized film, is produced strictly in accordance with the Nation Standard and IEC standard by the introduced advanced foreign techniques and equipment.
◆The device is suitablefor low voltage power network to improve power factor, reduce reactive loss and better the voltage quality.