SMD Aluminum Electrolytic Capacitors ▏105℃ 1,000Hrs ▏CAKA
FEATURES
105°C, 1000 hours assured.
Replaces RVS Series
Vertical chip type miniaturized for 5.5mm.
RoHS Compliant
105°C, 1000 hours assured.
Replaces RVS Series
Vertical chip type miniaturized for 5.5mm.
RoHS Compliant
SPECIFICATIONS
| Item | Performance | ||||||||||
| Operating Temp. Range | -55°C ~ + 105°C | ||||||||||
| Capacitance Tolerance | ± 20% (120Hz, 20°C) | ||||||||||
| Leakage Current (at 20•C) | I=0.01CV or 3 (μA) whichever is greater (after 2 minutes) Where C=rated capacitance in μ F and V= rated working voltage | ||||||||||
| Dissipation Factor
Tanδ at 120 Hz, 20°C |
Rated Voltage | 6.3 | 10 | 16 | 25 | 35 | 50 | ||||
| Tanδ (max) | 0.30 | 0.26 | 0.22 | 0.16 | 0.13 | 0.12 | |||||
| Low Temperature
Characteristics (at 120Hz) |
Rated Voltage | 6.3 | 10 | 16 | 25 | 35 | 50 | ||||
|
Impedance Ratio Maximum |
Z(-25°C) /Z(+20°C) | 4 | 3 | 2 | 2 | 2 | 2 | ||||
| Z(-40°C) /Z(+20°C) | 8 | 5 | 4 | 3 | 3 | 3 | |||||
|
Life Test |
Test Time |
Load Life | Shelf Life | ||||||||
| 1000 Hrs | 1000 Hrs | ||||||||||
| Capacitance Change |
Within ±20% of initial value |
Within ± 20% of initial value |
|||||||||
| Dissipation Factor | Less than 200% of specified value | Less than 200% of specified value | |||||||||
| Leakage Current | Within specified value | Within specified value | |||||||||
| Test Conditions | 20°C (after rated voltage applied for 1000 hours at
105°C |
20° C (after storage for 1000 hours at 105°C
without voltage) |
|||||||||
|
Ripple Current & Frequency Multilpiers |
VDC(V) Freq. (Hz) | 50 | 120 | 1K | 10K up | ||||||
| Under 16 | 0.80 | 1.00 | 1.15 | 1.25 | |||||||
| 25 ~ 35 | 0.80 | 1.00 | 1.25 | 1.40 | |||||||
| 50 | 0.80 | 1.00 | 1.35 | 1.50 | |||||||
| Standards | JIS C 5101-1-18 | ||||||||||
DIMENSION & PERMISSIBLE RIPPLE CURRENT
Ripple Current mA/rms at 120 Hz, 105°C
| VDC
μF Contents |
6.3 (0J) | 10 (1A) | 16 (1C) | 25 (1E) | 35 (1V) | 50 (1H) | |||||||
| φD x L | mA | φD x L | mA | φD x L | mA | φD x L | mA | φD x L | mA | φD x L | mA | ||
| 0.1 | 0R1 | 4 x 5.3 | 2 | ||||||||||
| 0.22 | R22 | 4 x 5.3 | 3 | ||||||||||
| 0.33 | R33 | 4 x 5.3 | 4 | ||||||||||
| 0.47 | R47 | 4 x 5.3 | 5 | ||||||||||
| 1 | 010 | 4 x 5.3 | 7 | ||||||||||
| 2.2 | 2R2 | 4 x 5.3 | 10 | ||||||||||
| 3.3 | 3R3 | 4 x 5.3 | 12 | ||||||||||
| 4.7 | 4R7 | 4 x 5.3 | 12 | 4 x 5.3 | 14 | 5 x 5.3 | 17 | ||||||
| 10 | 100 | 4 x 5.3 | 15 | 4 x 5.3 | 16 | 5 x 5.3 | 21 | 5 x 5.3 | 23 | 6.3 x 5.3 | 26 | ||
| 22 | 220 | 4 x 5.3 | 21 | 5 x 5.3 | 25 | 5 x 5.3 | 28 | 6.3 x 5.3 | 36 | 6.3 x 5.3 | 50 | ||
| 33 | 330 | 5 x 5.3 | 30 | 5 x 5.3 | 31 | 6.3 x 5.3 | 40 | 6.3 x 5.3 | 44 | ||||
| 47 | 470 | 5 x 5.3 | 36 | 6.3 x 5.3 | 43 | 6.3 x 5.3 | 47 | 6.3 x 5.3 | 60 | ||||
| 100 | 101 | 6.3 x 5.3 | 61 | 6.3 x 5.3 | 65 | 6.3 x 5.3 | 70 | ||||||
PAD SPACING AND DIAMETER
| φD±0.5 | L | A±0.2 | B±0.2 | C±0.2 | W | P±0.2 |
| 4 | 5.3±0.2 | 4.3 | 4.3 | 2.0 | 0.5 to 0.8 | 1.0 |
| 5 | 5.3±0.2 | 5.3 | 5.3 | 2.3 | 0.5 to 0.8 | 1.5 |
| 6.3 | 5.3±0.2 | 6.6 | 6.6 | 2.7 | 0.5 to 0.8 | 2.0 |
PART NUMBER EXAMPLE
CAKA 100 M 1E TR 050 053
FEATURES
◆ 105°C, 1000 hours assured.
◆ Vertical chip type miniaturized for 5.5mm.
◆ RoHS Compliant
