Polymer electrolytic capacitor low ESR CABAC for military & defense
- 125°C series, high heat resistance, leaded type.
- Low ESR, high frequency and low
for defense
- The national military standard level meets the environmental requirements of vibration and low
- It is suitable for energy storage, filtering and bypass in electronic circuits in aerospace, aviation, cold, high altitude and ocean.
| item | characteristic | ||||
| Operating temperature range | -55℃~+125℃ | ||||
| Rated operating voltage range | 10V~100V | ||||
| Nominal capacitance range | 8.2μF~22000μF | ||||
| Allowable deviation
nominal capacitance |
of | M（±20% ） | （25℃，120Hz） | ||
| DC leakage current*1 | I≤0.01CRUR（μA） （25℃，2min）
CR: Nominal capacitance (μF); UR: Rated voltage (V) |
||||
| Loss tangent tgδ (max) | For details, please refer to the “List of Product Specifications and Technical Parameters”
（25℃，120Hz） |
||||
| ESR (maximum)*2 | For details, please refer to the “List of Product Specifications and Technical Parameters”
（25℃，100KHz） |
||||
| Low temperature
characteristics (capacitance rate of change) |
(C25°C -C-55℃）/C25℃≤35% | （25℃，120Hz） | |||
|
Durability (High Temperature Test) |
The rated voltage is applied at 125°C for 2000h, and after recovery for 24h, the test is at
room temperature (25°C±5°C), and its elec trical performance conforms to: |
||||
| Rate of change in capacitance | ≤± 15% of initial measurements | ||||
| DC leakage current | ≤ initial prescriptive value | ||||
| The loss angle is tangent | ≤ initial measurements | ||||
| ESR | ≤ 200% of the initial measurement | ||||
|
Store at high temperatures |
After storage at 125 °C for 1000h, recovery for 24 h, and test at room temperature
(25 °C±5 °C), its electrical performance conforms to: |
||||
| Rate of change in capacitance | ≤± 15% of initial measurements | ||||
| DC leakage current | ≤ initial prescriptive value | ||||
| The loss angle is tangent | ≤ initial measurements | ||||
| ESR | ≤ 200% of the initial measurement | ||||
FEATURES
◆ 105°C, 1000 hours assured.
◆ Standard micro miniature size with 5mm height.
◆ RoHS Compliance
