Snap-In Electrolytic Capacitors ▏105℃ 5,000Hrs ▏CAVA

FEATURES
Snap-in, 105°C
5,000 hour life

Items	Performance
Operating Temperature Range	-25°C ~ +105°C
Capacitance Tolerance	+20% (at 120Hz, 20°C)
Leakage Current (at 20°C)	I = 0.01CV or 3 mA whichever is smaller (after 5 minutes) Where, C= rated capacitance in µF. V= rated DC working voltage in V.
Dissipation Factor (Tanδ at 120Hz, 20°C)	Rated Voltage	200	250	350	400	450
	Tan (max)	0.15	0.15	0.15	0.15	0.15
Low Temperature Characteristics (at 120Hz)	Impedance ratio shall not exceed the values given in the table below.
	Rated Voltage			200	250	350	400	400
	Impedance Ratio	Z(-25°C)/Z(+20°C)		4	4	4	8	8
Load Life Test	Test Time		5,000 Hrs
	Capacitance Change		Within +20% of initial value
	Dissipation Factor		Less than 250% of specified value
	Leakage Current		Within specified value
	* The above specifications shall be satisfied when the capacitors are restored to 20°C after the rated voltage applied for 5,000 hrs at 105°C
Shelf Life Test	Test Time		1,000 Hrs
	Capacitance Change		Within +20% of initial value
	Dissipation Factor		Less than 150% of specified value
	Leakage Current		Within specified value
	* The above specifications shall be satisfied when the capacitors are restored to 20°C after exposing them for 1,000 hrs at 105°C without voltage applied. The rated voltage shall be applied to the capacitors before the measurements (Refer to JIS C 5102)
Ripple Current & Frequency Multipliers	Freq. (Hz)	50/60	120	300	1K	10K up
	Multiplier	0.8	1.0	1.1	1.3	1.4
Other Standards	JIS C 5101-4

FEATURES
◆ Has a snap-in terminal which can solder to PCB directly and need not fixture to save processing time.

◆ Suitable for electronic equipment with medium-high voltage circuits. Printed circuit board terminal snap-in type and lug terminal type available.

◆ 5,000 Hour Life